Installation
Oven Assembly
Before assembly and installation of the oven, check that all components have been received. In addition to the oven, legs, decks and/or other ac- cessories may be required.
Single Sections
D4” (10 cm) legs are shipped inside the oven, packed in a separate carton.
DThe decks are individually packaged and se- cured to the oven back.
Double Sections
D4” (10 cm) legs are packed in lower sections.
DSpacer is shipped attached to the upper sec- tion.
DSecuring plate to attach units together is lo- cated in the upper section.
DThe decks are packaged with each section.
LEG ATTACHMENT
1.Tip bottom oven section backward.
2.Attach each of the four legs into the nuts se- cured in the oven bottom.
3.Tighten each leg and adjust the leg feet to approximately the same height.
NOTE: Final leg fet adjustment will be re- quired during the leveling operation.
Figure 3
6
