INFRARED/RADIANT COMPACT BROILER

INTRODUCTION

INTRODUCTION

Congratulations! You have purchased one of the finest pieces of heavy-duty commercial cooking equipment on the market.

You will find that your new equipment, like all Blodgett Range equipment, has been designed and manufactured to meet the toughest standards in the industry. Each piece of Blodgett Range equipment is carefully engineered and designs are verified through laboratory tests and field installations. With proper care and field maintenance, you will experience years of reliable, trouble-free operation. For best results, read this manual carefully.

RETAIN THIS MANUAL FOR FUTURE REFERENCE.

This manual is for the Blodgett Range/Platinum Infrared and Radiant Compact Broiler, which may be mounted over a range or on a wall, or used as a countertop unit by attaching legs to the base. The serial plate is located under the broiler bottom grease drawer at the front, toward the left (see Figure 1 below).

Read these instructions carefully before attempting installation. Installation and initial startup should be performed by a qualified installer. Unless the installation instructions for this product are followed by a qualified service technician (a person experienced in and knowledgeable of the installation of commercial gas and/or electric cooking equipment) then the terms and conditions on the Manufacturer’s Limited Warranty will be rendered void and no warranty of any kind shall apply.

In the event you have questions concerning the installation, use, care, or service of the product, contact:

Blodgett Range Technical Service

1100 Old Honeycutt Road

Fuquay-Varina, North Carolina 27526 USA

919-552-9161

www.Blodgettrange.com

Figure 1

Location of Serial Plate

Serial Plate (Hidden under grease drawer)

INSTALLATION & OPERATIONS MANUAL 1186529 REV 3 (12/06)

PAGE 3 OF 24

Page 3
Image 3
Blodgett B36-NFR, B48-RAD, B48-NFR, B36-RAD manual Introduction, Location of Serial Plate