Blomberg KQD 1360X instruction manual Connection of Water Hose to the Jug, in some models

Connection of Water Hose to the Jug

(in some models)

To connect water to the refrigerator from a jug, a pump is needed. Follow the instructions below after connecting one end of the water pipe coming out of the pump to the refrigerator as described on the previous page.

1.Finish the connection by pushing the other end of the water pipe into the water pipe inlet of the pump as shown in the figure.

2.Put and fix the pump hose into the jug as shown in the figure.

3.After completing the connection, plug in and run the pump.

To provide an efficient operation of the pump, wait for 2-3 minutes after starting the pump.

C You may refer to the user manual of the pump while making the water connection.

CThere is no need to use water filter in

case a jug is used.

CPump must be used when jug will be used.

1a

1b

2

12

EN