Blomberg TKF 8439 A Changing the programme after the programme has started, Child-proof lock

end of the programme if anti-creasing function is active.

Changing the programme after the programme has started

You can use this feature to dry your laundry in a different program after your machine has started to run.

For example;

Press and hold the “Start/Pause/Cancel” button for about 3 seconds to “Cancel” the programme in order to select “Extra Dry” programme instead of “Iron Dry” programme. Select the “Extra Dry” program by rotating the program knob. Press “Start/Pause/Cancel” button to start the program.

CIf you select a new programme by turning the programme selection knob while your machine is running, then the current program is cancelled and new programme information is displayed.

laundry before the drying programme has started.

CIf you select a new programme by turning the programme selection knob while your machine is in standby, then the current program is cancelled and new programme information is displayed.

Child-proof lock

There is a child-proof lock to prevent any programme interruption due to the pressing of button while the programme is running. The loading door and all button except the “On/Off” button on the panel are deactivated when the child-proof lock is active.

In order to activate the child-proof lock, press on the “audio warning” and “anti- creasing” buttons simultaneously for 3 seconds.

To start a new programme after the programme is over or to interrupt the programme, the child-proof lock should be deactivated. Press the same buttons for

3 sec. again to deactivate the child-proof lock.

Lock symbol will appear on the screen when the child-proof lock is activated.

Adding/removing laundry in standby mode

In order to add or take out laundry after the start-up of the programme;

1.Press the “Start/Pause/Cancel” button to switch the machine to “Pause” mode. Drying process will stop.

2.Open the door at Pause position and close it again after adding or taking out laundry.

3.Press “Start/Pause/Cancel” button to start the program.

CAny laundry added after the drying process was started may cause the already dried clothes in the machine intermingle with wet clothes and the result will be wet laundry after the drying process is over.

CLaundry may be added or taken out as much as desired during a drying process, but as this process will interrupt drying continuously, it will extend the program duration and increase energy consumption. Therefore, it is recommended to add

CChild-proof lock will also be deactivated when the machine is restarted by pressing the on/off button.

When the child-proof lock is activated:

•Display icons will not change even if the position of programme selection knob is changed while the machine is running or in halt.

•If the child-proof lock is deactivated after changing the position of the programme selection knob while your machine is running, your machine stops and new programme information is displayed

21

EN