Onkyo CR-505 Setting the Clock Manually, Displaying the Date & Time, For European models

Powering Up and Setting the Clock—Continued

STANDBY/ON		CLOCK	CLOCK CALL
		CALL
2	3		TIMER
1		TIMER
5	6
4
8	9
7
--/--- CLEAR			ENTER
10/0		ENTER
DISPLAY	MODE
SLEEP		REPEAT
MUTING		INPUT

DIRECT

CD

MD

Setting the Clock Manually

For European models:

If you cannot set the clock by using the ACCUCLOCK function, you can set it manually. In this case, the ACCUCLOCK function will not automatically cali- brate the clock each day.

1 Press the [TIMER] button repeatedly until “CLOCK” appears.

4 Press the [ENTER] button.

The time flashes.

5 Use the Up/Down []/[ ] buttons to set the time.

6 Press the [ENTER] button to set the clock.

“ADJUSTED” appears on the display.

Displaying the Date & Time

1 Press the [CLOCK CALL] button.

The date and time appear on the display.

Press the [CLOCK CALL] button again to return to the previous display.

VOLUME

MIN MAX

STANDBY / ON PHONES INPUT MENU DIRECT BASS TREBLE PRESET

PUSH TO ENTER

Only for European models:

Press the [ENTER] button and use the Up/Down []/ [ ] buttons to select “MANUAL ADJ.”

2 Press the [ENTER] button.

The day of the week flashes.

3 Use the Up/Down []/[ ] buttons to select a day.

STANDBY/ON

Displaying the Time in Standby Mode

You can set the CR-505 so that the time is displayed while the CR-505 is in Standby mode.

1 With the CR-505 turned on, press and hold the CR-505’s [STANDBY/ON] button for more than 2 seconds.

To turn off the time display, repeat this procedure.

Note:

Setting the CR-505 to display the time will slightly increase the power consumption in Standby mode.

18