Onkyo CR-505 instruction manual Presetting FM Stations Automatically, Presetting Stations Manually

Using the Radio—Continued

Presetting FM Stations Automatically

With the Auto Preset function you can automatically preset all the FM stations available in your area.

1 Use the INPUT []/[ ] buttons to select FM.

2 Press the [MODE] button.

3 Use the [ ]/[ ] buttons to display “P- EDIT,” and then press the [ENTER] button.

4 Use the [ ]/[ ] buttons to display “A.PRESET,” and then press the [ENTER] button.

Auto Preset function starts.

The Auto Preset function scans the FM band from low to high, presetting up to 30 stations with strong signals.

Note:

All previously stored presets will be overwritten when the Auto Preset function is used again.

Using the buttons on the CR-505:

1.Use the [INPUT] button to select FM.

2.Press the [MENU] button.

3.Turn the [ / ] control until “P-EDIT” appears on the display and then push the [ / ] control.

4.Turn the [ / ] control until “A.PRESET” appears on the display and then push the [ / ] control.

Presetting Stations Manually

You can preset up to 40 of your favorite AM and FM radio stations.

1 Tune into the station that you want to store as a preset.

2 Press the [MODE] button.

3 Use the [ ]/[ ] buttons to display “P- EDIT,” and then press the [ENTER] button.

4 Use the [ ]/[ ] buttons to display “WRITE,” and then press the [ENTER] but- ton.

The preset number flashes.

5 While the preset number is flashing, use the [ ]/[ ] buttons to select a preset from 1 through 40.

You cannot choose any preset number that has already been registered for either the FM or AM station.

6 Press the [ENTER] button to store the sta- tion.

The station is stored and the preset number stops flash- ing.

Repeat this procedure for all of your favorite radio sta- tions.

Note:

For European models, when the CR-505 is tuned into a sta- tion that’s transmitting PS (Program Service Name) RDS information, the station’s name will be displayed instead of the frequency.

Using the buttons on the CR-505:

1.Tune into the station that you want to store as a preset.

2.Press the [MENU] button.

3.Turn the [ / ] control until “P-EDIT” appears on the display and then push the [ / ] control.

4.Turn the [ / ] control until “WRITE” appears on the display and push the [ / ] control.

5.While the preset number is flashing, use the [ / ] control to select a preset from 1 through 40.

6.Press the [ / ] control to store the station.

Selecting Presets

You can select previously stored presets as follows.

Using the CR-505

1 Turn the [ / ] control to select presets.

Using the remote controller

1 Use the PRESET [ ]/[ ] buttons to select presets.

25