Onkyo Powering Up and Setting the Clock, Powering Up the CR-505, If ACCUCLOCK does not stop

Powering Up and Setting the Clock

VOLUME

							MIN	MAX
STANDBY / ON	PHONES	INPUT	MENU	DIRECT	BASS	TREBLE	PRESET
							PUSH TO ENTER
STANDBY/ON

Standby indicator

Powering Up the CR-505

Before connecting the power cord, complete all connections (see pages 11 to 15).

1 Connect the power cord to a suitable wall outlet.

The CR-505 enters Standby mode, and the Standby indicator comes on.

2 To turn on the CR-505, press the [STANDBY/ON] button.

The CR-505 comes on, the display lights up, and the Standby indicator goes off.

To turn off the CR-505, press the [STANDBY/ON] button again. The CR-505 enters Standby mode and the Standby indicator comes on.

If you are using any model other than the European, please skip to “Setting the Clock Manually” on page 18.

ACCUCLOCK Function (for European models only)

STANDBY/ON		CLOCK	CLOCK CALL
		CALL
2	3		TIMER
1		TIMER
5	6
4
8	9
7
--/---	CLEAR		ENTER
10/0		ENTER

DISPLAY	DISPLAY	MODE
	SLEEP	REPEAT
	MUTING	INPUT

DIRECT

CD

The very first time you turn on the CR-505, the ACCU- CLOCK function automatically sets the clock by using the CT (Clock Time) information present in RDS radio broad- casts.

While the clock is being set, “WAIT” appears on the dis- play, as shown. It may take a while to set the clock.

When the clock has been set, “ADJUSTED” appears on the display for a while.

Use the [CLOCK CALL] button to check if the clock has been set correctly.

If the clock has not been set correctly, see “Setting the Clock Manually” on page 18.

The ACCUCLOCK function automatically calibrates the clock daily at 2 AM, 3 AM and 2 PM.

If ACCUCLOCK does not stop:

When the radio reception is not good, the ACCUCLOCK function may not end. To force the ACCUCLOCK function to end, press the [DISPLAY] button. In this case, set the clock manually.

If the wrong day or time appears on the display:

If you live close to the border with another country, the CT information may have been taken from a radio station in another time zone. In this case you should specify another station and try setting again (see “Setting ACCUCLOCK to Use a Specific Station” on page 17).

16