• Delicate

You can wash your delicate clothes on this Programme. It has more sensitive washing movements and does not make intermediate spinning compared to “Synthetic” Programme. It must be used for clothes for which sensitive washing is recommended.

• Hand wash&Silk

You can wash your woolen/delicate clothes that bear “not machine- washable” labels for which hand wash is recommended on this Programme. It washes the laundry with very tender washing movements without damaging your clothes.

•Refresh

This Programme is used to quickly wash (30 minutes) a small amount of lightly soiled cotton garments.

• Super

This Programme washes for a longer period at 40°C and gives the same result as the "Cottons 60°C" Programme, thus it saves energy. It is suitable for clothes for which you cannot use the "Cottons 60°C" Programme.

• Shirts

You can use this Programme to wash cottons and synthetics together. There is no need to sort them.

• Sports

This Programme is suitable for clothes that are normally worn for a short time such as sportswear. It is used to quickly wash a small amount of cotton/synthetic blended clothes.

• Jean

Use this programme to wash your cotton and synthetic clothes together without sorting them.

Special Programmes

For specific applications, you can select any of the following Programmes:

•Rinse

This Programme is used when you want to rinse or starch separately.

• Spin + Drain

This Programme is used to apply an additional spin cycle for the laundry or to drain the water in the machine.

Before starting this Programme, select the desired spin sped and press "Start/

Pause/Cancel" button. Your machine drains the water after spinning at the set spin speed.

If you only want to drain the water without spinning your laundry, select “Spin and Pump” Programme, and then select no spin function with spin speed selection button. Press “Start/Pause/ Cancel” button.

AYou should use a lower spin speed for delicate laundries.

Spin speed selection

Whenever a new Programme is selected, the maximum spin speed of the selected Programme is displayed on the spin speed indicator.

To decrease the spin speed, press the “Spin” button. Spin speed decreases gradually. Then, rinse hold and no spin options are shown respectively.

Rinse hold is shown with “” and no spin is shown with “ ” symbols.

If you do not want to unload your clothes immediately after Programme, you may use rinse hold function in order to prevent your clothes become wrinkled in anhydrous conditions. With this function, your laundry is kept in the final rinsing water. If you want to spin your laundry that you left in water:

-Adjust the spin speed.

-Press “Start/Pause/Cancel” button. Programme resumes. Your machines drains the water and spins your laundry. You can use no spin function in order to drain the water without spinning at the end of the Programme.

49

EN

Page 49
Image 49
Blomberg WMT 8320 S user manual Special Programmes, Spin speed selection