13 - EN

Auxiliary functions

Auxiliary function selection
Ifanauxiliaryfunctionthatshouldnotbe
selected together with a previously selected
function is chosen, the first selected function
willbecancelledandthelastauxiliaryfunction
selection will remain active.
Ex.:Ifyouwanttoselectpre-washfirstand
thenquickwash,pre-washwillbecancelled
andquickwashwillremainactive.
Auxiliaryfunctionthatisnotcompatiblewith
theprogramcannotbeselected.(see,
“ProgramSelectionTable”)
• Prewash
When you select this function, the display will
indicate"F1"symbol.
• Apre-washisonlyworthwhileforheavily
soiledlaundry.Withoutpre-washyousave
energy, water, detergent and time.
• Pre-washwithoutdetergentis
recommended for lace and curtains.
• Quick Wash
With this function, the wash time is shortened.
"F2”symbollightsuponthedisplay.
• Usethisfunctionforsmalleramountsor
slightly soiled laundries.
• Rinse Plus
When this function is selected, washing and
rinsing is performed with plenty of water. "F3”
symbollightsuponthedisplay.
• Anti-Creasing
Withthisfunction,drummovementwillbe
lessened to prevent creasing and spinning
speedislimited.Inaddition,washingiscarried
outatahigherwaterlevel."F4”symbollights
up on the display.
• Usethisfunctionfordelicatelaundriesthat
crease easily.
C Whenever you select this auxiliary function,
load your machine with half of the
maximum laundry specified in the program
table.
Time display
The display shows the time remaining for
the program to complete while a program
is running. Time is displayed in hours and
minutes as “01:30”.
Time delay
With the “Time delay” function you can delay
the program start up to 24 hours. Setting can
bemadeinintervalsof30minutes.
Open the loading door, place the laundry
inside and fill detergent drawer. Set the
washing program, temperature, spin speed
and,ifrequired,selecttheauxiliaryfunctions.
Press“Timedelaying”buttons“+”and“-”to
set your desired time delay. The Time delaying
symbolwillflash.Press“Start/Pause/Cancel”
button.Thenthetimedelaystartstocount
down.TheTimedelayingsymbolwilllightup.
TheStartsymbolwilllightup.
The “:” in the middle of the displayed time
delay will start to flash.
• Morelaundrymaybeloadedortakenout
during the time delay period. At the end of
the time delay countdown process, time
delayingsymbolfadesandthewashing
starts as the program duration is displayed.
Changing the delay time
Ifyouwanttochangethetimeduringthe
countdown:
Press“Start/Pause/Cancel”button.“:“in
the middle of the screen will stop flashing.
TheStandbysymbolwilllightup.TheTime
delayingsymbolwillflash.TheStartSymbol
willfade.Press“Timedelaying”buttons“+”or
“-”tosetyourdesiredtimedelay.Press“Start/
Pause/Cancel”button.TheTimedelaying
symbolwilllightup.TheStandbysymbolwill
fade.TheStartsymbolwilllightup.The“:”in
the middle of the displayed time delay will start
to flash.
Canceling the time delay
Ifyouwanttocancelthetimedelay
countdown and start the program immediately:
Press“Start/Pause/Cancel”button.The“:”in
the middle of the displayed time delay will stop
flashing.Startsymbolwillfade.Thestandby
symbolandthetimedelayingsymbolwillflash.
Presstimedelayingbutton“-”todecreasethe
desired time delay. Program duration after 30
minutesshallbedisplayed.PressStart/Pause/
CancelButtontostarttheprogram.
Starting the Program
PressStart/Pause/Cancelbuttontostartthe
program.Thestartsymbolwhichindicates
that the program has started will light up.
Thedoorlocksandthedoorlockedsymbol
willlightup.TheSymboloftherelevantstep
(prewash, main wash, rinse, softener and spin)
that the program has started from will light up.
Changing the selections after the
program has started
The selected spin speed and program
temperature fade out. An empty frame
appears.
Whenthe“Programselection”buttonis
broughttotheappropriateposition,rpmand
temperature data reappear.
Switching the machine to standby mode
Themachineisswitchedtostandbymode
bypressing“Start/Pause/Cancel”button
momentarily.TheStandbysymbolwhich
indicatesthemachineisinstandbymode
lightsupandthestartsymbolthatshowsthe