22 EN
Auxiliary function selection
Use the following auxiliary functions
according to your daily needs. Select
the desired auxiliary functions before
starting the programme. Furthermore,
you may also select or cancel auxiliary
functions that are suitable to the running
programme without pressing the Start
/ Pause button when the machine is
operating. For this, the machine must be
in a step before the auxiliary function you
are going to select or cancel.
If the auxiliary function cannot be selected
or canceled, light of the relevant auxiliary
function will blink 3 times to warn the user.
C Some functions cannot be selected
together. For example, Prewash and
Quick Wash.
C If a second auxiliary function
conflicting with the first one is
selected before starting the machine,
the function selected first will be
canceled and the second auxiliary
function selection will remain active.
For example, if you want to select
Quick Wash after you have selected
the Prewash, Prewash will be
canceled and Quick Wash will remain
active.
C An auxiliary function that is not
compatible with the programme
cannot be selected. (See "Programme
and consumption table")
C Auxiliary Function buttons may
vary according to the model of the
machine.
• Prewash
A Prewash is only worthwhile for heavily
soiled laundry. Not using the Prewash will
save energy, water, detergent and time.
C Prewash without detergent is
recommended for tulle and curtains.
• Shorter Wash
This function can be used in Cottons and
Synthetics programmes. It decreases the
washing times and also the number of
rinsing steps for lightly soiled laundry.
C When you select this function,
load your machine with half of the
maximum laundry specified in the
programme table.
• Rinse Plus
This function enables the machine to
make another rinsing in addition to the
one already made after the main wash.
Thus, the risk for sensitive skins (babies,
allergic skins, etc.) to be effected by
the minimal detergent remnants on the
laundry can be reduced.
• Anti-Creasing
This function creases the clothes lesser
when they are being washed. Drum
movement is reduced and spinning speed
is limited to prevent creasing. In addition,
washing is done with a higher water level.
Use this function for delicate laundry that
creases easily.
• Rinse Hold
If you are not going to unload your
clothes immediately after the programme
completes, you may use rinse hold
function to keep your laundry in the final
rinsing water in order to prevent them
from getting wrinkled when there is no
water in the machine. Press Start / Pause
button after this process if you want to
drain the water without spinning your
laundry. Programme will resume and
complete after draining the water.
If you want to spin the laundry held in
water, adjust the Spin Speed and press
Start / Pause button.
The programme resumes. Water
is drained, laundry is spun and the
programme is completed.
• Soaking
The Soaking auxiliary function ensures
better removal of stains ingrained into the
clothes by holding them in the detergent
water prior to startup of the programme.
Delayed Start (In some models only)
With the Delayed Start function the
startup of the programme may be delayed
up to 3, 6 or 9 hours.
C Do not use liquid detergents when
you set Delayed Start! There is the
risk of staining of the clothes.
1. Open the loading door, place the
laundry and put detergent, etc.
2. Select the washing programme,
temperature, spin speed and, if
required, the auxiliary functions.
3. Set the desired time by pressing
the Delayed Start button. When the
button is pressed once, 3 hours
delayed start is selected. When the
same button is pressed again, 6
hours delay is selected, and when
it is pressed for the third time, 9