23 EN
hours delayed start is selected. If you
press the Delayed Start button once
again, Delayed Start function will be
canceled.
4. Press Start / Pause button. Previous
delayed start time light turns off and
next delayed start time light turns on
after every 3 hours.
5. At the end of the countdown, all
delayed start lights will turn off and
the selected programme will start.
C Additional laundry may be loaded
during the delayed start period.
Changing the Delayed Start period
Press Delayed Start button. Every time
the button is pressed, the period will
change in 3-hour increments and the light
of the selected delayed start time will turn
on.
Canceling the Delayed Start function
If you want to cancel the delayed start
countdown and start the programme
immediately:
1. Set the Delayed Start period to
zero (all delayed start period lights
will turn off) or turn the Programme
Selection knob to any programme.
Thus, Delayed Start function will
be canceled. The End/Cancel light
flashes continuously.
2. Then, select the programme you want
to run again.
3. Press Start / Pause button to start the
programme.
Starting the programme
1. Press Start / Pause button to start the
programme.
2. Programme follow-up light showing
the startup of the programme will turn
on.
C If no programme is started or no key
is pressed within 1 minute during
programme selection process, the
machine will switch to Pause mode
and the illumination level of the
temperature, speed and loading
door indicator lights will decrease.
Other indicator lights and indicators
will turn off. Once the Programme
Selection knob is rotated or any
button is pressed, indicator lights and
indicators will turn on again.
Child Lock
Use child lock function to prevent children
from tampering with the machine. Thus
you can avoid any changes in a running
programme.
C If the Programme Selection knob is
rotated when the child lock is active,
the lights on the 1st and 2nd auxiliary
function buttons will blink 3 times. The
child lock does not allow any change
in the programmes and the selected
temperature, speed and auxiliary
functions.
C Even if another programme is selected
with the Programme Selection
knob while the Child Lock is active,
previously selected programme will
continue running.
C When the Child Lock is active and
the machine is running, you can
switch the machine to Pause mode
without deactivating the Child Lock
by turning the Programme Selection
knob to On / Off position. When
you turn the Programme Selection
knob afterwards, the programme will
resume.
To activate the Child Lock:
Press and hold 1st and 2nd Auxiliary
Function buttons for 3 seconds. The lights
on the 1st and 2nd Auxiliary Function
buttons will flash while you keep the
buttons pressed for 3 seconds.
To deactivate the Child Lock:
Press and hold 1st and 2nd auxiliary
function buttons for 3 seconds while any
programme is running. The lights on the
1st and 2nd Auxiliary Function buttons will
flash while you keep the buttons pressed
for 3 seconds.
C In addition to the method above, to
deactivate the Child Lock, switch the
Programme Selection knob to On
/ Off position when no programme
is running, and select another
programme.
C When the power is restored after a
power failure or after your machine
is unplugged and plugged in again,
the Child Lock will not be deactivated
when the machine resumes operating.
Progress of programme
Progress of a running programme
can be followed from the Programme