Loading door cannot be opened.

•Door lock is activated because of the water level in the machine. >>> Drain the water by running the Pump or Spin programme.

•Machine is heating up the water or it is at the spinning cycle. >>> Wait until the programme completes.

•Child lock is engaged. Door lock will be deactivated a couple of minutes after the programme has come to an end. >>> Wait for a couple of minutes for deactivation of the door lock.

Washing takes longer time than the one specified in the manual.

• Water pressure is low. >>> Machine waits until taking in adequate amount of water to prevent poor washing quality due to the decreased amount of water. Therefore, the washing time extends.

• Voltage might be low. >>> Washing time is prolonged to avoid poor washing results when the supply voltage is low.

• Input temperature of water might be low. >>> Required time to heat up the water

extends in cold seasons. Also, washing time can be lengthened to avoid poor washing results.

• Number of rinses and/or amount of rinse water might have increased. >>>

Machine increases the amount of rinse water when good rinsing is needed and adds an extra rinsing step if necessary.

• Excessive foam might have occurred and automatic foam absorption system might have been activated due to too much detergent usage. >>> Use

recommended amount of detergent.

C Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its surrounding environment. Laundry should be rearranged and re-spun.

Programme time does not countdown. (On models with display)

• Timer may stop during water intake. >>> Timer indicator will not countdown until the machine takes in adequate amount of water. The machine will wait until there is sufficient amount of water to avoid poor washing results due to lack of water.

Timer indicator will resume countdown after this.

• Timer may stop during heating step. >>> Timer indicator will not countdown until the machine reaches the selected temperature.

• Timer may stop during spinning step. >>> Automatic unbalanced load detection

system might be activated due to the unbalanced distribution of the laundry in the drum.

C Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its surrounding environment. Laundry should be rearranged and re-spun.

Programme time does not countdown.

• There might be an imbalance of laundry in the machine. >>> Automatic

unbalanced load detection system might be activated due to the unbalanced distribution of the laundry in the drum.

C Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its surrounding environment. Laundry should be rearranged and re-spun.

29

EN

Page 28 Page 30
Page 29
Image 29
Blomberg WNF 6221 user manual Recommended amount of detergent
Page 28 Page 30

WNF 6221 specifications

The Blomberg WNF 6221 is a front-loading washing machine known for its efficiency, advanced technology, and user-friendly design. This model is particularly appreciated for its excellent energy rating, which not only reduces electricity consumption but also effectively contributes to lower utility bills.

One of the standout features of the WNF 6221 is its capacity. It can accommodate up to 6 kg of laundry in one cycle, making it suitable for small to medium-sized households. This capacity ensures that users can wash a substantial load without needing to run multiple cycles, thus saving both time and energy.

The machine's spin speed is another notable characteristic. With a maximum spin speed of 1200 RPM, the Blomberg WNF 6221 efficiently removes excess water from clothes, reducing drying time significantly. This feature is especially beneficial during colder months or in regions with high humidity, where drying clothes can be a challenge.

In terms of technology, the Blomberg WNF 6221 incorporates several advanced features. It is equipped with an automatic load detection system that adjusts the water and energy consumption based on the size of the load. This not only enhances efficiency but also ensures optimal washing results. The machine also has a range of washing programs tailored to different fabric types and soil levels, including quick wash cycles for those times when you need clean clothes in a hurry.

The design of the WNF 6221 is both sleek and practical. Its intuitive control panel features an easy-to-read display, making it straightforward for users to navigate through various settings. Additionally, the model operates quietly, which is a significant plus for those living in apartments or shared spaces.

Another appealing aspect of the Blomberg WNF 6221 is its commitment to environmental sustainability. The machine uses eco-friendly technologies that minimize water usage and energy consumption without compromising on performance. This makes it an excellent choice for environmentally conscious consumers looking to reduce their carbon footprint.

In summary, the Blomberg WNF 6221 washing machine combines efficiency, capacity, and advanced technology to provide an excellent laundry solution. Its array of features, including automatic load detection, multiple washing programs, and quiet operation, makes it a valuable addition to any household.
Top Page Image Contents