7 Troubleshooting

Programme cannot be started or selected.

•Washing machine has switched to self protection mode due to a supply problem (line voltage, water pressure, etc.). >>> Press and hold Start / Pause button for 3 seconds to reset the machine to factory settings. (See "Canceling the programme")

Water in the machine.

•Some water might have remained in the product due to the quality control processes in the production. >>> This is not a failure; water is not harmful to the machine.

Machine vibrates or makes noise.

•Machine might be standing unbalanced. >>> Adjust the feet to level the machine.

•A hard substance might have entered into the pump filter. >>> Clean the pump filter.

•Transportation safety bolts are not removed. >>> Remove the transportation safety bolts.

•Laundry quantity in the machine might be too little. >>> Add more laundry to the machine.

•Machine might be overloaded with laundry. >>> Take out some of the laundry from the machine or distribute the load by hand to balance it homogenously in the machine.

•Machine might be leaning on a rigid item. >>> Make sure that the machine is not leaning on anything.

Machine stopped shortly after the programme started.

•Machine might have stopped temporarily due to low voltage. >>> It will resume running when the voltage restores to the normal level.

Programme time does not countdown. (On models with display)

•Timer may stop during water intake. >>> Timer indicator will not countdown until the machine takes in adequate amount of water. The machine will wait until there is sufficient amount of water to avoid poor washing results due to lack of water. Timer indicator will resume countdown after this.

•Timer may stop during heating step. >>> Timer indicator will not countdown until the machine reaches the selected temperature.

•Timer may stop during spinning step. >>> Automatic unbalanced load detection system might be

 

activated due to the unbalanced distribution of the laundry in the drum.

C

Machine does not switch to spinning step when the laundry is not evenly distributed in the drum

 

to prevent any damage to the machine and to its surrounding environment. Laundry should be

 

rearranged and re-spun.

Foam is overflowing from the detergent drawer.

•Too much detergent is used. >>> Mix 1 tablespoonful softener and ½ l water and pour into the main

 

wash compartment of the detergent drawer.

C

Put detergent into the machine suitable for the programmes and maximum loads indicated in the

 

“Programme and consumption table”. When you use additional chemicals (stain removers, bleachs

 

and etc), reduce the amount of detergent.

Laundry remains wet at the end of the programme

•Excessive foam might have occurred and automatic foam absorption system might have been

activated due to too much detergent usage. >>> Use recommended amount of detergent. C Machine does not switch to spinning step when the laundry is not evenly distributed in the drum

to prevent any damage to the machine and to its surrounding environment. Laundry should be rearranged and re-spun.

A If you cannot eliminate the problem although you follow the instructions in this section, consult your dealer or the Authorized Service Agent. Never try to repair a nonfunctional product yourself.

2820522240_EN/190911.1648

17

EN

Page 16 Page 18
Page 17
Image 17
Blomberg WNF 7361 AE20, WNF 7341 AE20, WNF 7301 WE20 Troubleshooting, Foam is overflowing from the detergent drawer
Page 16 Page 18

WNF 7301 WE20, WNF 7341 AE20, WNF 7321 AE20, WNF 7361 AE20 specifications

Blomberg, a brand renowned for its innovative and energy-efficient home appliances, offers several advanced washing machines, including models WNF 7361 AE20, WNF 7321 AE20, WNF 7341 AE20, and WNF 7301 WE20. Each of these models boasts a range of features designed to enhance the laundry experience and ensure optimal cleaning results.

The WNF 7361 AE20 stands out with its impressive 8 kg load capacity, making it ideal for larger households. It incorporates Blomberg's ProSmart Inverter Motor, known for its quiet operation and energy efficiency. This model features a variety of wash programs, including a quick-wash setting that allows users to clean lightly soiled garments in just 14 minutes. Additionally, the machine's Hygiene+ program is designed to eliminate bacteria and allergens, providing peace of mind for sensitive skin.

Next, the WNF 7321 AE20 offers a slightly more compact 7 kg load capacity, making it a perfect fit for smaller spaces without sacrificing performance. This model also features the ProSmart Inverter Motor, ensuring low energy consumption as well as reduced noise levels. Users will appreciate the DrumClean program, which keeps the washing drum hygienic and odor-free, and the Delay Start option, providing flexibility in scheduling washes at their convenience.

The WNF 7341 AE20 introduces a 9 kg capacity, catering to families with larger laundry demands. Similar to the other models, it includes the ProSmart Inverter Motor for efficient and quiet operations. The EcoGentle function ensures that even delicate fabrics receive gentle care while being cleaned efficiently. This model also features a user-friendly LCD display, making it easy to choose the desired settings and programs.

Lastly, the WNF 7301 WE20 is a versatile model with a load capacity of 7 kg. It combines efficiency with a sleek design, offering multiple washing programs that cater to various fabric types. The AutoDry feature is particularly beneficial, automatically stopping the drying process once the desired moisture level is achieved, preventing fabric damage and energy waste.

All these models are equipped with a robust set of features that reflect Blomberg's commitment to quality, efficiency, and environmental responsibility. With state-of-the-art technologies, including energy-efficient motors and specialized wash programs, they provide unrivaled convenience and performance in laundry care. Each model embodies a blend of functionality and modern design, making them excellent choices for any home.
Top Page Image Contents