•To prevent flowing of dirty water back into the machine and to allow for easy discharge, do not immerse the hose end into the dirty water or drive it in the drain more than 15 cm. If it is too long, cut it short.

•The end of the hose should not be bent, it should not be stepped on and the hose must not be pinched between the drain and the machine.

•If the length of the hose is too short, use it by adding an original extension hose. Length of the hose may not be longer than 3.2 m. To avoid water leak failures, the connection between the extension hose and the drain hose of the product must be fitted well with an appropriate clamp as not to come off and leak.

Adjusting the feet

A In order to ensure that the product operates more silent and vibration-free, it must stand level and balanced on its feet. Balance the machine by adjusting the feet. Otherwise, the product may move from its place and cause crushing and vibration problems.

1.Loosen the lock nuts on the feet by hand.

2.Adjust the feet until the product stands level and balanced.

3.Tighten all lock nuts again by hand.

4

A Do not use any tools to loosen the lock nuts. Otherwise, they will get damaged.

Electrical connection

Connect the product to a grounded outlet protected by a fuse complying with the values in the "Technical specifications" table. Our company shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations.

•Connection must comply with national regulations.

•Power cable plug must be within easy reach after installation.

•The voltage and allowed fuse or breaker protection are specified in the “Technical specifications” section. If the current value of the fuse or breaker in the house is less than 16 Amps, have a qualified electrician install a 16

Amp fuse.

•The specified voltage must be equal to your mains voltage.

•Do not make connections via extension cables

or multi-plugs.

B Damaged power cables must be replaced by the Authorized Service Agents.

First use

Before starting to use the product, make sure that all preparations are made in accordance with the instructions in sections "Important safety instructions" and "Installation".

To prepare the product for washing laundry, perform first operation in Drum Cleaning programme. If your machine is not featured with Drum Cleaning programme, use Cottons-90 programme and select Additional Water or Extra Rinse auxiliary functions as well. Before starting the programme, put max. 100 g of powder anti-limescale into the main wash detergent compartment (compartment nr. II). If the anti-limescale is in tablet form, put only one tablet into compartment nr. II. Dry the inside of the bellow with a clean piece of cloth after the programme has come to an end.

C Use an anti-limescale suitable for the washing machines.

C Some water might have remained in the product due to the quality control processes in

EN

Page 3 Page 5
Page 4
Image 4
Blomberg WNF 7341 AE20, WNF 7361 AE20, WNF 7301 WE20, WNF 7321 AE20 Adjusting the feet, Electrical connection, First use
Page 3 Page 5

WNF 7301 WE20, WNF 7341 AE20, WNF 7321 AE20, WNF 7361 AE20 specifications

Blomberg, a brand renowned for its innovative and energy-efficient home appliances, offers several advanced washing machines, including models WNF 7361 AE20, WNF 7321 AE20, WNF 7341 AE20, and WNF 7301 WE20. Each of these models boasts a range of features designed to enhance the laundry experience and ensure optimal cleaning results.

The WNF 7361 AE20 stands out with its impressive 8 kg load capacity, making it ideal for larger households. It incorporates Blomberg's ProSmart Inverter Motor, known for its quiet operation and energy efficiency. This model features a variety of wash programs, including a quick-wash setting that allows users to clean lightly soiled garments in just 14 minutes. Additionally, the machine's Hygiene+ program is designed to eliminate bacteria and allergens, providing peace of mind for sensitive skin.

Next, the WNF 7321 AE20 offers a slightly more compact 7 kg load capacity, making it a perfect fit for smaller spaces without sacrificing performance. This model also features the ProSmart Inverter Motor, ensuring low energy consumption as well as reduced noise levels. Users will appreciate the DrumClean program, which keeps the washing drum hygienic and odor-free, and the Delay Start option, providing flexibility in scheduling washes at their convenience.

The WNF 7341 AE20 introduces a 9 kg capacity, catering to families with larger laundry demands. Similar to the other models, it includes the ProSmart Inverter Motor for efficient and quiet operations. The EcoGentle function ensures that even delicate fabrics receive gentle care while being cleaned efficiently. This model also features a user-friendly LCD display, making it easy to choose the desired settings and programs.

Lastly, the WNF 7301 WE20 is a versatile model with a load capacity of 7 kg. It combines efficiency with a sleek design, offering multiple washing programs that cater to various fabric types. The AutoDry feature is particularly beneficial, automatically stopping the drying process once the desired moisture level is achieved, preventing fabric damage and energy waste.

All these models are equipped with a robust set of features that reflect Blomberg's commitment to quality, efficiency, and environmental responsibility. With state-of-the-art technologies, including energy-efficient motors and specialized wash programs, they provide unrivaled convenience and performance in laundry care. Each model embodies a blend of functionality and modern design, making them excellent choices for any home.
Top Page Image Contents