7 Troubleshooting

Programme cannot be started or selected.

Washing machine has switched to self protection mode due to a supply problem (line voltage, water pressure, etc.). >>> Press and hold Start / Pause button for 3 seconds to reset the machine to factory settings. (See "Canceling the programme")

Water in the machine.

Some water might have remained in the product due to the quality control processes in the production. >>> This is not a failure; water is not harmful to the machine.

Machine vibrates or makes noise.

Machine might be standing unbalanced. >>> Adjust the feet to level the machine.

A hard substance might have entered into the pump filter. >>> Clean the pump filter.

Transportation safety bolts are not removed. >>> Remove the transportation safety bolts.

Laundry quantity in the machine might be too little. >>> Add more laundry to the machine.

Machine might be overloaded with laundry. >>> Take out some of the laundry from the machine or distribute the load by hand to balance it homogenously in the machine.

Machine might be leaning on a rigid item. >>> Make sure that the machine is not leaning on anything.

Machine stopped shortly after the programme started.

Machine might have stopped temporarily due to low voltage. >>> It will resume running when the voltage restores to the normal level.

Programme time does not countdown. (On models with display)

Timer may stop during water intake. >>> Timer indicator will not countdown until the machine takes in adequate amount of water. The machine will wait until there is sufficient amount of water to avoid poor washing results due to lack of water. Timer indicator will resume countdown after this.

Timer may stop during heating step. >>> Timer indicator will not countdown until the machine reaches the selected temperature.

Timer may stop during spinning step. >>> Automatic unbalanced load detection system might be

activated due to the unbalanced distribution of the laundry in the drum.

C Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its surrounding environment. Laundry should be rearranged and re-spun.

Foam is overflowing from the detergent drawer.

Too much detergent is used. >>> Mix 1 tablespoonful softener and ½ l water and pour into the

main wash compartment of the detergent drawer.

C Put detergent into the machine suitable for the programmes and maximum loads indicated in the “Programme and consumption table”. When you use additional chemicals (stain removers, bleachs and etc), reduce the amount of detergent.

Laundry remains wet at the end of the programme

Excessive foam might have occurred and automatic foam absorption system might have been

activated due to too much detergent usage. >>> Use recommended amount of detergent. C Machine does not switch to spinning step when the laundry is not evenly distributed in the drum

to prevent any damage to the machine and to its surrounding environment. Laundry should be rearranged and re-spun.

A If you cannot eliminate the problem although you follow the instructions in this section, consult your dealer or the Authorized Service Agent. Never try to repair a nonfunctional product yourself.

18

EN2820522393_EN/201011.1141

Page 18
Image 18
Blomberg WNF 8447 RCE30 user manual Troubleshooting

WNF 8447 RCE30 specifications

The Blomberg WNF 8447 RCE30 is a state-of-the-art washing machine that combines efficiency, performance, and advanced technology to meet the needs of modern households. With its sleek design and user-friendly interface, this model is ideal for consumers looking for reliability and innovation in their laundry routine.

One of the standout features of the Blomberg WNF 8447 RCE30 is its impressive energy efficiency rating. This machine is designed to consume less water and electricity, making it eco-friendly and cost-effective. Its A+++ energy rating ensures that users can enjoy significant savings on their utility bills while contributing to environmental sustainability.

Focusing on performance, the WNF 8447 RCE30 boasts a generous 8 kg capacity, making it suitable for families of various sizes. The maximum spin speed of 1400 RPM ensures that clothes come out cleaner and with minimal residual moisture, reducing drying time and energy usage in subsequent drying processes.

This model incorporates cutting-edge technologies, including the ProSmart Inverter Motor. This motor technology provides a quieter operation and increased durability, allowing the washing machine to work efficiently while also prolonging its lifespan. Additionally, the unique anti-vibration design enhances stability and minimizes noise during the spin cycle.

Versatility is another key characteristic of the WNF 8447 RCE30, featuring a variety of wash programs tailored to different types of fabrics and soiling levels. The machine offers specialized cycles for cotton, synthetic, delicate items, and even a quick wash option for when time is of the essence. The possibility to adjust the temperature and spin speed further personalizes the washing experience.

Moreover, the Blomberg WNF 8447 RCE30 is equipped with smart features, such as a delay start function, allowing users to set a wash cycle to start at their convenience. The digital display and intuitive controls enhance usability, making it easy to select preferred settings.

In conclusion, the Blomberg WNF 8447 RCE30 is a top-tier washing machine that excels in energy efficiency, performance, and user-friendliness. With its modern technologies and versatile wash programs, it is an excellent choice for anyone seeking to enhance their laundry experience while being mindful of the environment.