come out excessively wet. Therefore, follow the heights described in the figure.

•To prevent flowing of dirty water back into the machine and to allow for easy discharge, do not immerse the hose end into the dirty water or drive it in the drain more than 15 cm. If it is too long, cut it short.

•The end of the hose should not be bent, it should not be stepped on and the hose must not be pinched between the drain and the machine.

•If the length of the hose is too short, use it by adding an original extension hose. Length of the hose may not be longer than 3.2 m.

To avoid water leak failures, the connection between the extension hose and the drain hose of the product must be fitted well with an appropriate clamp as not to come off and leak.

Adjusting the feet

A In order to ensure that the product operates more silent and vibration-free, it must stand level and balanced on its feet. Balance the machine by adjusting the feet. Otherwise, the product may move from its place and cause crushing and vibration problems.

A Do not use any tools to loosen the lock nuts. Otherwise, they will get damaged.

Electrical connection

Connect the product to a grounded outlet protected by a fuse complying with the values in the "Technical specifications" table. Our company shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations.

•Connection must comply with national regulations.

•Power cable plug must be within easy reach after installation.

•The voltage and allowed fuse or breaker protection are specified in the “Technical specifications” section. If the current value of the fuse or breaker in the house is less than 16 Amps, have a qualified electrician install a 16

Amp fuse.

•The specified voltage must be equal to your mains voltage.

•Do not make connections via extension cables or multi-plugs.

B Damaged power cables must be replaced by the Authorized Service Agents.

First use

Before starting to use the product, make sure that all preparations are made in accordance with the instructions in sections "Important safety instructions" and "Installation".

To prepare the product for washing laundry, perform first operation in Drum Cleaning programme. If your machine is not featured with Drum Cleaning programme, use Cottons-90 programme and select Additional Water or Extra Rinse auxiliary functions as well. Before starting the programme, put max. 100 g of powder anti-limescale into the main wash detergent compartment (compartment nr. II). If the anti-limescale is in tablet form, put only one tablet into compartment nr. II. Dry the inside of the bellow with a clean piece of cloth after the programme has come to an end.

1.Loosen the lock nuts on the feet by hand.

2.Adjust the feet until the product stands level and balanced.

3.Tighten all lock nuts again by hand.

4

C Use an anti-limescale suitable for the washing machines.

C Some water might have remained in the product due to the quality control processes

EN

Page 3 Page 5
Page 4
Image 4
Blomberg WNF 8447 RCE30 user manual Adjusting the feet, Electrical connection, First use
Page 3 Page 5

WNF 8447 RCE30 specifications

The Blomberg WNF 8447 RCE30 is a state-of-the-art washing machine that combines efficiency, performance, and advanced technology to meet the needs of modern households. With its sleek design and user-friendly interface, this model is ideal for consumers looking for reliability and innovation in their laundry routine.

One of the standout features of the Blomberg WNF 8447 RCE30 is its impressive energy efficiency rating. This machine is designed to consume less water and electricity, making it eco-friendly and cost-effective. Its A+++ energy rating ensures that users can enjoy significant savings on their utility bills while contributing to environmental sustainability.

Focusing on performance, the WNF 8447 RCE30 boasts a generous 8 kg capacity, making it suitable for families of various sizes. The maximum spin speed of 1400 RPM ensures that clothes come out cleaner and with minimal residual moisture, reducing drying time and energy usage in subsequent drying processes.

This model incorporates cutting-edge technologies, including the ProSmart Inverter Motor. This motor technology provides a quieter operation and increased durability, allowing the washing machine to work efficiently while also prolonging its lifespan. Additionally, the unique anti-vibration design enhances stability and minimizes noise during the spin cycle.

Versatility is another key characteristic of the WNF 8447 RCE30, featuring a variety of wash programs tailored to different types of fabrics and soiling levels. The machine offers specialized cycles for cotton, synthetic, delicate items, and even a quick wash option for when time is of the essence. The possibility to adjust the temperature and spin speed further personalizes the washing experience.

Moreover, the Blomberg WNF 8447 RCE30 is equipped with smart features, such as a delay start function, allowing users to set a wash cycle to start at their convenience. The digital display and intuitive controls enhance usability, making it easy to select preferred settings.

In conclusion, the Blomberg WNF 8447 RCE30 is a top-tier washing machine that excels in energy efficiency, performance, and user-friendliness. With its modern technologies and versatile wash programs, it is an excellent choice for anyone seeking to enhance their laundry experience while being mindful of the environment.
Top Page Image Contents