Auxiliary functions
Auxiliary function selection
If an auxiliary function that should not be selected together with a previously selected function is chosen, the first selected function will be cancelled and the last auxiliary function selection will remain active.
Ex.: If you want to select
Auxiliary function that is not compatible with the program cannot be selected. (see, “Program Selection Table”)
• Prewash
When you select this function, the display will indicate "F1" symbol.
•A
•
•Quick Wash
With this function, the wash time is shortened. "F2” symbol lights up on the display.
•Use this function for smaller amounts or slightly soiled laundries.
•Rinse Plus
When this function is selected, washing and rinsing is performed with plenty of water. "F3” symbol lights up on the display.
• Anti-Creasing
With this function, drum movement will be lessened to prevent creasing and spinning speed is limited. In addition, washing is carried out at a higher water level. "F4” symbol lights up on the display.
• Use this function for delicate laundries that crease easily.
C Whenever you select this auxiliary function, load your machine with half of the maximum laundry specified in the program table.
Time display
The display shows the time remaining for the program to complete while a program is running. Time is displayed in hours and minutes as “01:30”.
Time delay
With the “Time delay” function you can delay the program start up to 24 hours. Setting can be made in intervals of 30 minutes.
Open the loading door, place the laundry inside and fill detergent drawer. Set the washing program, temperature, spin speed and, if required, select the auxiliary functions. Press “Time delaying” buttons “+” and
symbol will flash. Press “Start/Pause/Cancel” button. Then the time delay starts to count down. The Time delaying symbol will light up. The Start symbol will light up.
The “:” in the middle of the displayed time delay will start to flash.
•More laundry may be loaded or taken out during the time delay period. At the end of the time delay countdown process, time delaying symbol fades and the washing starts as the program duration is displayed.
Changing the delay time
If you want to change the time during the countdown:
Press “Start/Pause/Cancel” button. “ : “ in the middle of the screen will stop flashing. The Standby symbol will light up. The Time delaying symbol will flash. The Start Symbol will fade. Press “Time delaying” buttons “+” or
Canceling the time delay
If you want to cancel the time delay countdown and start the program immediately: Press “Start/Pause/Cancel” button. The “:” in the middle of the displayed time delay will stop flashing. Start symbol will fade. The standby symbol and the time delaying symbol will flash. Press time delaying button
Starting the Program
Press Start/Pause/Cancel button to start the program. The start symbol which indicates that the program has started will light up. The door locks and the door locked symbol will light up. The Symbol of the relevant step (prewash, main wash, rinse, softener and spin) that the program has started from will light up.
Changing the selections after the program has started
The selected spin speed and program temperature fade out. An empty frame appears.
When the “Program selection” button is brought to the appropriate position, rpm and temperature data reappear.
Switching the machine to standby mode The machine is switched to standby mode by pressing “Start/Pause/Cancel” button momentarily. The Standby symbol which indicates the machine is in standby mode lights up and the start symbol that shows the
9 - EN
