OPERATION (continued)
USER’S GUIDE
1.Remove the brew chamber from under the spray head. Place one (1) genuine Bloomfield paper filter into
the brew chamber. Add your choice of
Shake the brew chamber gently to level the tea leaves.
Slide the brew chamber back into place.
2.Place an empty dispenser under the brew chamber.
3.If any volume other than “Standard” brew volume is required, press the appropriate volume key.
4.To begin the brew cycle, press BREW
key. Hot water will start spraying over the tea leaves, and brewed tea will start filling the server. Cold water will flow from the dilution nozzle to bring the tea to the proper concentration. When the tea stops flowing from the brew chamber, the fresh tea is ready to serve.
NOTE: Brewing will not begin until the Precise Temperature for Brewing™ has been reached. (See page 6)
PAPER FILTER
BREW CHAMBER
WARNING: 
Burn Hazard.
This appliance dispenses very hot liquid. Serious bodily injury from scalding can occur from contact with dispensed liquids.
CAUTION:
Burn Hazard
To avoid splashing or overflowing hot liquids, ALWAYS use an empty dispenser before starting the brew cycle. Failure to comply can cause serious burns.
CAUTION:
Burn Hazard
After a brew cycle, brew chamber contents are HOT. Remove the brew chamber and dispose of used filter and tea leaves with care. Failure to comply can cause serious burns.
5.At the end of the brew cycle, the view screen will read “Brew complete”. After all dripping has stopped, remove the brew chamber from the brewer. Discard the used paper filter and tea leaves.
Brew complete
6.The brewer is now be ready to begin another brewing cycle.
CAUTION:
Burn Hazard
Exposed surfaces of the appliance, as well as brew chamber may be HOT to the touch, and can cause serious burns.
7
