INSTALLATION

READ THIS CAREFULLY BEFORE STARTING THE INSTALLATION

IMPORTANT:

To enable the installer to make a quality installation and to minimize installation time, the following suggestions and tests should be done before the actual unit installation is started:

CAUTION: Equipment

Electrical Damage

DO NOT plug in or energize this appliance until all Installation Instructions are read and followed. Damage to the Brewer will occur if these instructions are not followed.

CAUTION: Unstable

Equipment Hazard

It is very important for safety and for proper operation that the brewer is level and stable when standing in its final operating position. Provided adjustable, non-skid legs must be installed at each corner of the unit. Failure to do so will result in movement of the brewer which can cause personal Injury and/ or damage to brewer.

NOTE: Water supply inlet line must meet certain minimum criteria to insure successful operation of the brewer. Bloomfield recommends 1/4" copper tubing for installation of less than 12 feet and 3/8" for more than 12 feet from a 1/2" water supply line.

Unpack the unit. Inspect all components for completeness and condition. Ensure that all packing materials have been removed from the unit.

Verify that the Spray Head Gasket and Spray Disk are properly installed.

LEVELING THE UNIT

Verify that an adjustable leg is installed at each corner of the brewer, and that a rubber foot is installed on each leg.

Set Brewer in its operating location. Level the Brewer. A spirit level should be placed on the top of the unit, at the edge, as a guide when making level adjustments.

Level the unit from left to right and front to back by turning the adjustable feet. Be sure all four feet touch the counter to prevent tipping.

PLUMBER’S INSTALLATION INSTRUCTIONS

Brewer must be connected to a POTABLE WATER, COLD WATER line. Flush water line before connecting to Brewer.

DO NOT use a saddle valve with a self-piercing tap for the water line connection. Such a tap can become restricted by waterline debris. For systems that must use a saddle tap, shut off the main water supply and drill a 3/16” (minimum) tap for the saddle connection, in order to insure an ample water supply. Remember to flush the line prior to installing the saddle.

The brewer must be installed on a water line with average pressure between 20 PSI and 90 PSI. If your water pressure exceeds 90 PSI at anytime, a pressure regulator must be installed in the water supply line to limit the pressure to not more than 90 PSI in order to avoid damage to lines and solenoid.

A water shut-off valve should be installed on the incoming water line in a convenient location (Use a low restriction type valve, such as a 1/4-turn ball valve, to avoid loss of water flow thru the valve.

The provided water line strainer must be installed in the supply line, between the shutoff valve and inlet fitting. Note FLOW arrow marking on strainer body.

606 Owners Manual for 8742-8748 Tea Brewer 76116

4

Page 5 Page 7
Page 6
Image 6
Bloomfield 8742 owner manual Leveling the Unit, PLUMBER’S Installation Instructions
Page 5 Page 7

8742 specifications

Bloomfield 8742 is a cutting-edge platform designed to leverage the latest technologies in the field of data processing and management. This innovative system has been engineered to support a wide range of applications, making it a versatile solution for organizations seeking to enhance their data-driven decision-making capabilities.

One of the main features of Bloomfield 8742 is its robust architecture, which is capable of handling large volumes of data with impressive speed and efficiency. The platform employs distributed computing technology, allowing it to process data in parallel across numerous nodes. This not only accelerates processing times but also enhances the system’s scalability, enabling businesses to easily adjust their resources to meet growing demands.

Another standout characteristic of Bloomfield 8742 is its advanced data analytics capabilities. With built-in machine learning algorithms, users can extract valuable insights from their data without requiring extensive programming knowledge. The platform’s intuitive user interface simplifies the process of building and deploying models, fostering a more collaborative environment for data scientists and non-technical stakeholders alike.

Additionally, Bloomfield 8742 places a strong emphasis on data security. It incorporates state-of-the-art encryption protocols to ensure that sensitive information is protected at all times. Moreover, the system supports role-based access controls, enabling organizations to manage user permissions effectively and safeguard their data against unauthorized access.

The integration capabilities of Bloomfield 8742 are also noteworthy. It allows seamless connectivity with various external systems and applications, making it easy for organizations to enhance their existing workflows. Whether it’s connecting to an enterprise resource planning (ERP) system or integrating with cloud storage solutions, Bloomfield 8742 provides the tools necessary to create a cohesive data ecosystem.

In summary, Bloomfield 8742 stands out in the realm of data management solutions due to its powerful architecture, advanced analytics features, robust security measures, and seamless integration capabilities. As organizations increasingly rely on data to drive their strategies, Bloomfield 8742 proves to be an essential tool that meets the evolving needs of modern businesses, empowering them to turn data into actionable insights.
Top Page Image Contents