WARRANTY STATEMENT

All electrical equipment manufactured by WELLS BLOOMFIELD, LLC is warranted against defects in materials and workmanship for a period of one year from the date of original installation or eighteen (18) months from the date of shipment from our factory, whichever comes first, and is for the benefit of the original purchaser, except that:

a.airpots carry a 30 day parts warranty only.

b.dispensers; i.e., tea and coffee carry a 90 days parts warranty only, excludes decanters.

THE FOREGOING OBLIGATION IS EXPRESSLY GIVEN IN LIEU OF ANY OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WHICH ARE HEREBY EXCLUDED.

WELLS BLOOMFIELD, LLC SHALL NOT BE LIABLE FOR INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES FROM ANY CAUSE WHATSOEVER.

This warranty is void if it is determined that upon inspection by an Authorized Service Agency that the equipment has been modified, misused, misapplied, improperly installed, or damaged in transit or by fire, flood or act of God.

It also does not apply if the serial nameplate has been removed or unauthorized service personnel perform service. The prices charged by Bloomfield Industries for its products are based upon the limitations in this warranty. Seller’s obligation under this warranty is limited to the repair of defects without charge by a Bloomfield Authorized Service Agency or one of its sub-agencies. This service will be provided on customer’s premises for non-portable models. Portable models (a device with a cord and plug) must be taken or shipped to the closest Authorized Service Agency, transporta- tion charges prepaid, for services.

In addition to restrictions contained in this warranty, specific limitations are shown below (Additional Warranty Exclusions). Bloomfield Industries Authorized Service Agencies are located in principal cities.

This warranty is valid in the United States and void elsewhere. Please consult your classified telephone directory or your food service equipment dealer; or, for information and other details concerning warranty, write to:

Service Parts Department

Wells Bloomfield, LLC

P.O. Box 280

 

Verdi, NV 89439

 

Phone: (775) 689-5707

Fax: (775) 689-5976

SERVICE POLICY AND PROCEDURE GUIDE ADDITIONAL WARRANTY EXCLUSIONS

1.Resetting of safety thermostats, circuit breakers, overload protectors, or fuse replacements unless warranted conditions are the cause.

2.All problems due to operation at voltages other than specified on equipment nameplates; conversion to correct voltage must be the customer’s responsibility.

3.All problems due to electrical connections not made in accordance with electrical code requirements and wiring diagrams supplied with the equipment.

4.Replacement of items subject to normal wear, to include such items as knobs and light bulbs. Normal maintenance functions including adjustment of thermostats, microswitches, and replacement of fuses and indicating lights are not covered under warranty.

5.All problems due to inadequate water supply, such as fluctuating, or high or low water pressure.

6.All problems due to mineral/calcium deposits, or contamination from chlorides/chlorines. De-liming is considered a preventative maintenance function and is not covered by warranty.

7.Full use, care and maintenance instructions are supplied with each machine. Those miscellaneous adjustments noted are customer responsibility. Proper attention will prolong the life of the machine.

8.Travel mileage is limited to sixty (60) miles from an authorized Service Agency or one of its sub-agencies.

9.All labor shall be performed during normal working hours. Overtime premium shall be charged to the customer.

10.All genuine Bloomfield replacement parts are warranted for ninety (90) days from date of purchase on non- warranted equipment. Any use of non-genuine Bloomfield parts completely voids any warranty.

11.Installation, labor and job check-out are not considered warranty.

12.Charges incurred by delays, waiting time or operating restrictions that hinder the service technicians ability to perform services are not covered by warranty. This includes institutional and correctional facilities.

601 75815 Owners Manual

SHIPPING DAMAGE CLAIMS PROCEDURE

Integrity

NOTE: For your protection, please note that equipment in this shipment was carefully inspected and packaged by skilled personnel before leaving the factory.

Upon acceptance of this shipment, the transportation company assumes full responsibility for its safe delivery.

IF SHIPMENT ARRIVES DAMAGED:

1.VISIBLE LOSS OR DAMAGE: Be certain that any visible loss or damage is noted on the freight bill or express receipt, and that the note of loss or damage is signed by the delivery person.

2.FILE CLAIM FOR DAMAGE IMMEDIATELY: Regardless of the extent of the damage.

3.CONCEALED LOSS OR DAMAGE: if damage is unnoticed until the merchandise is unpacked, notify the transportation company or carrier immediately, and file “CONCEALED DAMAGE” claim with them. This must be done within fifteen (15) days from the date the delivery was made to you. Be sure to retain the container for inspection.

Wells Bloomfield cannot assume liability for damage or loss incurred in transit. We will, however, at your request, supply you with the necessary documents to support your claim.

Decanter Brewers

xi

Page 2
Image 2
Bloomfield 9012, 9010, 9016 owner manual Warranty Statement, Shipping Damage Claims Procedure

9012, 9016, 9010 specifications

Bloomfield has made a significant mark in the world of precision machining with its innovative series of machines, particularly the Bloomfield 9010, 9012, and 9016 models. These machines embody the advanced engineering principles and cutting-edge technologies that Bloomfield is known for, making them ideal for a variety of applications across different industries.

The Bloomfield 9010 is a versatile platform known for its robust construction and high-speed capabilities. It features a powerful spindle motor that allows for increased torque and faster operational speeds, ensuring efficient machining processes. This machine is designed with user-friendly software that streamlines the programming and command procedures, making it accessible for operators of varying skill levels. Its enhanced cooling system contributes to improved precision by maintaining optimal temperatures during operation, ensuring that thermal expansion does not compromise work quality.

The Bloomfield 9012 extends the functional capabilities of its predecessor with additional features that cater to more complex machining tasks. It integrates advanced automation technologies that allow for seamless integration into existing production lines. The 9012 machine comes equipped with multi-axis machining capabilities, which enable it to perform intricate geometries with high accuracy. Furthermore, the machine's tooling system is designed to accommodate a wide range of cutting tools, enhancing its adaptability for different materials and specifications.

Lastly, the Bloomfield 9016 takes precision machining to the next level with its state-of-the-art features. This model boasts an intelligent feedback system that constantly monitors the machining process, making real-time adjustments to enhance precision and reduce waste. The 9016 is also designed with a modular architecture that allows users to customize the machine according to their specific needs, making it a flexible option for both small and large manufacturing operations. With advanced safety systems in place, operators can work confidently, knowing that the machine is designed to protect against potential mishaps.

In summary, the Bloomfield 9010, 9012, and 9016 models represent the pinnacle of precision machining technology. They are built for performance, versatility, and user convenience, making them suitable for a wide range of industrial applications. From high-speed operations to complex multi-axis machining, these machines are engineered to meet the evolving demands of modern manufacturing environments.