Contact | ® |
Do not return to place of purchase. |
|
|
|
|
|
Step 8 – Attach Dome to Emitter
Gently lay Heater on its side using one styrofoam end to prop up top half. Align holes in Dome with threaded studs in Emitter brackets.
Secure Dome to Emitter using (3) Cap Nuts.
Leave Heater on its side for next step.
Step 9 – Secure Gas Line
Make sure angled side of Gas Clip pokes up through large hole in Platform.
Tighten screw until Gas Line is held securely in place.
Stand Heater upright.
At this point it is appropriate to permanently mount your heater to the surface where you wish to keep it. 3 Holes are provided in the base for mounting. The means of permanently mounting the heater is up to the installer, and so no hardware is provided for this proceedure.
Section View
Gas Line | Gas Line | |
Clip | ||
|
Bottom View
Owner’s manual: model 233010 outdoor patio heater | 6/8/04 | 10 |