Blue Rhino FC-0024, FC-0025 manual Operation, TW120 01/11

OPERATION

OPERATION

All Safety Shields, Guards and Safety devices including (but not limited to) - the Deflectors, Chain Guards, Steel Guards, Gearbox Shields, PTO integral shields, and Retractable Door Shields should be used and maintained in good working condition. All safety devices should be inspected carefully at least daily for missing or broken components. Missing, broken, or worn items must be replaced at once to reduce the possibility of injury or death from thrown objects, entanglement, or blade contact. (SGM-3)

•Lift Type-Ensure the tailwheel beam position support bolts are properly installed and tightened.

•Pull and Semi-Mount Type-Ensure that the tailwheel ratchet or hydraulic cylinder is installed and retained correctly to provide the desired cutting height.

•Inspect all bolts and screws and tighten to the recommended torque. OPS-R-0039_D

•Ensure the tractor PTO master shield and the mower slip clutch shield are in place, lowered, and in good condition.

•Ensure the driveline integral shield is in good condition and rotates freely.

•Ensure the driveline slip clutch (if equipped) is properly adjusted. OPS-R-0039

TW120 01/11 Operation Section 4-22

© 2011 Alamo Group Inc.