Blue Rhino FC-0025, FC-0024 manual Hydraulic or Manual Lift, Wheels Pull Type

ASSEMBLY

HYDRAULIC OR MANUAL LIFT

Attach the Spring Assembly option (FIGURE Asm-R-0186)to the lug on the cutter deck behind the Center Gearbox. Retain using 3/4 x 3 capscrew and locknut. Install the Hydraulic Cylinder (FIGURE Asm-R-0187)or the manual Ratchet Lift Screw 1"x2 3/4 (FIGURE Asm-R-0187)between the Axle Center Lug and the Lug directly behind the Center Gearbox. Tighten all Bolts securely.

WHEELS - PULL TYPE

Install the Wheels on the Wheel Hubs.

Note: If Laminated Tires are used, place the flat side of the Lug Nut against the Wheel. Note direction of travel and curvature of rubber segments in tire and install as shown in FIGURE Asm-R-0127.

TW120 01/11 Assembly Section 3-7

© 2011 Alamo Group Inc.

ASSEMBLY