| Contact | page no. | |
3 | ||
| ||
|
|
DO NOT RETURN PRODUCT TO STORE.
For assistance call 1.800.762.1142 toll free. Please have your owner’s manual and serial number available for reference.
For Easiest Assembly:
•To avoid losing any small components or hardware, assemble your product on a hard level surface that does not have cracks or openings.
•Clear an area large enough to layout all components and hardware.
•When applicable, tighten all hardware connections by hand first. Once the step is completed, go back and fully tighten all hardware.
•Follow all steps in order to properly assemble your product.
Step Assemble left cart frame1Attach left front and rear legs to frame support using 4 sets of large screws (D), large lock washers (J), and large washers (H).
Step Assemble right cart frame2A. Attach right front and rear legs to LP tank support using 4 sets of large screws (D), large lock washers (J), and large washers (H).
B.Insert axle into LP tank support.
C.Insert rubber spacers (K) and wheels onto axle. Secure using 2 nuts (E).
D.Place hub caps onto wheels.
3A. Attach back frame support to left and right legs using 3 sets of large screws (D), large lock washers (J), and large washers (H).
B.Attach front bottom panel to left and right legs using 2 sets of large screws (D), large lock washers (J), and large washers (H).
Note: image is shown from front.
Step Assemble cart 2
4A. Attach front top panel and LP tank heat resistant plate to left and right legs using 3 sets of large screws (D), large lock washers (J), and lock washers (H).
B.Secure front bottom panel to front top panel using 2 sets of large screws (D), large lock washers (J), lock washers (H), and wing nuts (F).
Note: image is shown from back.
Step Attach frame braces and LP tank support wire 5 A. Insert frame braces into slots on left and right cart frames.
B. Attach LP tank support wire to right cart frame using 2 wing nuts (F).