GOLD
Assembly Instructions (continued)
25 Attach Grease Cup and Grease Cup Support
Outdoor Natural Gas Barbecue Grill Model No. GBC873WNG
Installing Natural Gas LineInstallation should be done by a qualified service person.
CAUTION: If young children are in the area, a locking valve should be considered.
Connect Natural Gas LineBefore connecting, be sure that there is no debris caught in the head of the natural gas line, head of the grill natural gas line or in the head of the burner and burner ports.
Connect grill natural gas line to natural gas line.
Disconnect Natural Gas LineBefore disconnecting make sure the natural gas line valve is “OFF”.
Disconnect grill natural gas line from natural gas line.
Operating InstructionsFigure 1
Burner Connections
NG Connection
Burner venturi pipe
1. Make sure the regulator valve and hose connections are securely fastened to the burner and the gas line.
If your unit was assembled for you, visually check the connection between the burner venturi pipe and orifice. Make sure the burner venturi pipe fits over the orifice.
WARNING: Failure to inspect this connection or follow these instructions could cause a fire or an explosion which can cause death, serious bodily injury, or damage to property.
NG Valve
2. Please refer to diagram for proper installation. with Orifice (Figure 1 and 2)
3.If the burner pipe does not rest flush to the orifice, please contact 1.800.762.1142 for assistance.
NG Valve with
Main Burners Orifice
Figure 2
NG
Connection
Tank/Gas Line Connection
1.Make
2.Make sure control knobs are “OFF”. (Figure 3)
3.Turn “ON” natural gas main valve.
4.Spoon leak check solution at all “X” locations (Figure 4)
a.If any bubbles appear turn natural gas main valve “OFF”, reconnect and
b.If you continue to see bubbles after several attempts, turn natural gas main valve “OFF” and disconnect natural gas line and contact 1.800.762.1142 for assistance.
c.If no bubbles appear after one minute turn natural gas main valve “OFF”, wipe away solution and proceed.
| Burner |
Side Burner | venturi pipe |
Figure 3
Operating Main Burners | Figure 4 |
|
First Use
1.Make sure all labels, packaging and protective films have been removed from the grill.
2.Remove manufacturing oils before cooking on this grill for the first time, by operating the grill for at least 15 minutes on “HIGH” with the lid closed. This will “heat clean” the internal parts and dissipate odors.