BISTRO
CARE AND CLEANING
•Always remove the plug from the power point and allow the appliance to cool before cleaning.
•To remove the toast rack (F), push it and its guides (H) further into its recesses (G) on one side, then lift the opposite side clear. You can now clean the rack with a soft, damp cloth or soapy water. Dry the rack with a soft cloth.
•The crumb tray (E) must be emptied regularly, as too many crumbs constitute a fire hazard. Apply light pressure to the centre of the crumb tray cover and it will automatically open. It can now be slid out, emptied and cleaned with a soft, damp cloth and dried with a soft, dry cloth.
•Wipe the outside of the toaster with a soft, slightly dampened cloth. Dry it with a soft, dry cloth.
•Do not use chemicals, wire wool or abrasives when clean- ing the outside of the toaster.
•Never immerse the toaster in water or any other liquid.
•Clean the interior of the appliance by removing any crumbs. Do not use sharp or pointed utensils when doing so. This could damage the heating elements.
•To replace the toast rack (F), push it and its guides (H) into its recesses (G) on one side, then press the opposite side downwards so that it engages.
•Slide the crumb tray (E) back into the Toaster. Apply light pressure to the centre of the crumb tray cover to secure it in place.
•Any other servicing should be performed by an authorized service representative.
6
