BISTRO
–Do not operate the kettle on an inclined plane, Do not operate the kettle unless the element is fully immersed. Do not move while the kettle is switched on.
–To prevent damage to the appliances do not use alkaline cleaning agents when cleaning, use a soft cloth and a mild detergent.
–The kettle is only to be used with the base unit (7) provided
–CAUTION: Insure that the kettle is switched off before removing it from the base unit (7)
INSTALLATION
–Place the appliance on a stable flat surface which is neither hot nor near a heat source. The surface must be dry. Keep the appliance and its mains cable out of reach of children.
–During use, do not place the base unit on a metal tray or a metal surface.
–Ensure that the voltage indicated on the rating plate of the appliance agrees with the mains voltage in your area. Connect the appliance only to a properly earthed power point with a minimum output of 13A for 1500W. (Use a residual current device (RCD) seek the advice of an electrician.) While the appliance is in use, the mains plug must be accessible in case of an emergency. To ensure continued protection against risk of electric shock, connect to properly grounded outlets only.
–If the power point is unsuitable for accommodating the plug of your appliance, have the power point changed by a licensed electrician.
SAVE THESE INSTRUCTIONS
PARTS OF THE KETTLE
1 Hinged lid
2Push button to open lid
3 Scale filter
4 Water level gauge
5 ON/OFF switch
6 ON/OFF indicator light
7 Base unit
8 Max water level indicator
9 Min water level indicator
4
