3.

Remove loose hairs from inside

3 4

head assembly with brush. (fig. 3)

 

4.

Remove loose hairs on cutter

 

mount. (fig. 4)

 

5. Remove inner cutter assembly

by turning the center knob counter clockwise and lift out. (fig. 5) Clean hairs off with brush supplied. To maximize shaving comfort and closeness, periodically remove the head assembly to determine if your shaver needs cleaning, particularly if you have a heavy beard and use

the shaver daily. If you routinely check the amount of shaven hairs

 

under the head and clean the entire head assembly

5

when necessary, your shaver will always run at peak

performance. After cleaning, replace the inner cutter

 

assembly back into place.

 

Important! Make sure that the center knob is locked into place by pushing down and turning clockwise.

After cleaning, always replace the plastic head guard to protect the floating heads.

Trimmer Cleaning

Turn shaver off and open trimmer by pushing the trimmer button upward.

Using the brush, clean outside and inside of trimmer after each use.

When finished, close trimmer by sliding trimmer button down.

AXIS ORBIT 4000 AND ORBIT 2000 16 ENGLISH

AXIS ORBIT 4000 AND ORBIT 2000 17 ENGLISH

Page 9
Image 9
Bodyline Products International AX-2330, AX-2320 Mount. fig Remove inner cutter assembly, Assembly back into place