4Attach Speaker Mounting Assembly to Stationary Mounting Bracket
A)Place Speaker Mounting Assembly on the Stationary Mounting Assembly by putting the FRONT TABS of Speaker Assembly into the two FRONT CATCH slots of the Mounting Assembly (see INSET 1).
B)With both Front Tabs hooked securely into both Front Catch slots, gently rotate Speaker Assembly back until both REAR TABS “snap” into both REAR CATCH slots (see INSET 2). When properly engaged, this will provide TEMPORARY support for the Speaker Assembly.
DO NOT LEAVE SPEAKER IN THIS POSITION WITHOUT COMPLETING THE INSTALL PROCEDURES SHOWN WITHIN SECTION 5.
IMPORTANT: BE SURE THAT ALL TABS AND CATCH SLOTS ARE PROPERLY ENGAGED BEFORE LETTING GO OF THE SPEAKER ASSEMBLY. SERIOUS INJURY COULD RESULT WITH IMPROPER CONNECTIONS.
ADJUSTABLE
MOUNTING
BRACKET
| REAR |
| TAB |
FRONT | |
A8/A12 | TAB |
| |
SPEAKER |
|
ASSEMBLY |
|
| REAR |
| CATCH |
FRONT |
|
CATCH |
|
STATIONARY | |
MOUNTING | |
ASSEMBLY | |
FRONT |
|
TAB |
|
REAR | REAR |
TAB | |
FRONT | CATCH |
| |
CATCH |
|
INSET 1 | INSET 2 |
