5. Channel Selection
Turn the frequency rotary DIP SWITCH (11) to one of the sixteen channels. The slot on the switch shaft should match a number or letter on the dial, which indicates the selected channel.
6.Audio Level and Peak LED Indicator
The UDR16 receiver is equipped with a five segment LED AUDIO LEVEL DISPLAY. (15). Occasional flickering of the top Peak LED indicator on loud inputs to the transmitter is normal. If this LED lights continuously, turn down the INPUT
LEVEL CONTROL on the transmitter, or noticeable distortion may result.
7.Connecting the Audio Output
The UDR16 receiver provides both a fixed mic level BALANCED MIC AUDIO. OUTPUT XLR (7) and an adjustable line level AUDIO OUTPUT 1/4” jack (10).
Rear Panel XLR | Unbalanced 1/4” Plug | ||
|
|
|
|
|
|
|
|
Tip = signal (+)
Sleeve = ground
(Note: As when making any connection, make sure the amplifier or mixing board volume is at the minimum level before plugging in the receiver to avoid possible sound system damage.)
5
