![](/images/new-backgrounds/1024780/2478079x1.webp)
Alarm Display Messages
Note: The relay screen which contains the Alarm Display Messages is located inside the controller enclosure.
WARNING! Do not attempt to check the Alarms on the Controller located within the unit enclosure unless you are a qualified electrician!
The following is a list of Alarm Display Messages which can be found on the relay screen:
Temperature Controller Alarm and/or Regen Heater Temp Switch and/or Process Heater Temp Switch and/or Redundant Temp Safety
HIGH TEMP
Blower Overload
Valve Motor
Multiple Alarms
No Alarms
PROC BLWR
VALVE MTR
PROC BLWR HIGH TEMP VALVE MTR
HEAT 35
COOL 30 SYSTEM NORMAL
Dehumidifying Dryers | Chapter 4: Operation | 39 of 59 |