MTD LLC (MTD), The United States Environment Protection Agency (U. S. EPA)

Emission Control System Warranty Statement

(Owner’s Defect Warranty Rights and Obligations)

The U. S. EPA and MTD are pleased to explain the emissions control system warranty on your model year 2005 and later small off-road engine. New small off-road engines must be designed, built and equipped to meet the stringent anti-smog standards. MTD must warranty the emission control system on your engine for the period of time listed below, provided there has been no abuse, neglect or improper maintenance of your small off-road engine.

Your emission control system may include parts such as the carburetor, air cleaner, ignition system, exhaust system, and other associated emis- sion-related components.

Where a warrantable condition exists, MTD will repair your small off-road engine at no cost to your including diagnosis, parts and labor.

MANUFACTURER’S WARRANTY COVERAGE:

This emissions control system is warranted for two years. If any emission-related part on your engine is defective, the part will be repaired or replaced by MTD.

OWNER’S WARRANTY RESPONSIBILITIES:

As the small off-road engine owner, you are responsible for the performance of the required maintenance listed in your Owner’s Manual. MTD recommends that you retain all your receipts covering maintenances on your small off-road engine, but MTD can not deny warranty solely for the lack of receipts or for your failure to ensure the performance to all scheduled maintenance.

As the small off-road engine owner, you should however be aware that MTD may deny your warranty coverage if your small off-road engine or part has failed due to abuse, neglect, improper maintenance or unapproved modifications.

You are responsible for presenting your small off-road engine to an Authorized MTD Service Dealer as soon as a problem exists. The warranted repairs should be completed in a reasonable amount of time, not to exceed 30 days.

If you have any questions regarding your warranty rights and responsibilities, you should contact a MTD Service Representative at 1-800-668-1238 and address is MTD Products Ltd., P. O,. Box 1386, 97 Kent Avenue, Kitchener, Ontario Canada N2 G 4J1.

Defects Warranty Requirements for 1995 and Later Small Off-Road Engines:

This section applies to 1995 and later small off-road engines. The warranty period begins on the date the engine or equipment is delivered to an ultimate purchaser.

(a)General Emissions Warranty Coverage

MTD must warrant to the ultimate purchaser and each subsequent purchaser that the engine is:

(1)Designed, built, and equipped so as to conform with all applicable regulations adopted by the Air Resources Board pursuant to its authority in Chapters 1 and 2,Part 5, Division 26 of the Health and Safety Code; and

(2)Free from defects in materials and workmanship that cause the failure of a warranted part to be identical in all material respects to the part as described in the engine manufacturer’s application for certification for a period of two years.

(b)The warranty on emissions-related parts will be interpreted as follows:

(1)Any warranted part that is not scheduled for replacement as required maintenance in the written instructions required by Subsection (c) must be warranted for the warranty period defined in Subsection (a)(2). If any such part fails during the period of warranty coverage, it must be repaired or replaced by MTD according to Subsection (4) below. Any such part repaired or replaced under the warranty must be warranted for the remaining warranty period.

(2)Any warranted part that is scheduled only for regular inspection in the written instructions required by Subsection (c) must be warranted for the warranty period defined in Subsection (a)(2). A statement in such written instructions to the effect of “repair or replace as necessary” will not reduce the period of warranty coverage. Any such part repaired or replaced under warranty must be warranted for the remaining warranty period.

(3)Any warranted part that which is scheduled for replacement as required maintenance in the written instructions required by Subsection (c) must be warranted for the period of time prior to the first scheduled replacement point for that part. If the part fails prior to the first scheduled replacement, the part must be repaired or replaced by MTD according to Subsection (4) below. Any such part repaired or replaced under warranty must be warranted for the remainder of the period prior to the first scheduled replacement point for the part.

(4)Repair or replacement of any warranted part under the warranty provisions of this article must be performed at no charge to the owner at a warranty station.

(5)Notwithstanding the provisions of Subsection (4) above, warranty services or repairs must be provided at all MTD distribution centers that are franchised to service the subject engines.

(6)The owner must not be charged for diagnostic labor that leads to the determination that a warranted part is in fact defective, provided that such diagnostic work is performed at a warranty station.

24

EPA-1-CA

Page 24
Image 24
Bolens 18M warranty MANUFACTURER’S Warranty Coverage

18M specifications

The Bolens 18M is a versatile and robust lawn and garden tractor that has been designed to meet the needs of both residential and commercial users. Known for its durability and performance, the Bolens 18M exemplifies the qualities that homeowners and landscapers look for in a reliable outdoor equipment.

One of the main features of the Bolens 18M is its powerful 18-horsepower engine, which provides ample power for a variety of tasks, from mowing to hauling heavy loads. The engine is paired with a hydrostatic transmission, allowing for smooth and seamless operation. This feature enables users to change speed without the need for manual gear shifting, providing ease of use for all skill levels.

The design of the Bolens 18M is characterized by a strong steel frame and heavy-duty construction, ensuring it can withstand the rigors of regular use. The tractor is equipped with a wide cutting deck, typically around 42 inches, which allows for efficient mowing of larger areas in less time. Additionally, the cutting height can be easily adjusted to suit different types of grass and landscaping needs.

Another noteworthy technology in the Bolens 18M is its ergonomic steering and control layout. The tractor features a comfortable seat with armrests, enhancing the user's comfort during prolonged use. This design ensures that operators can maneuver the tractor with minimal fatigue, promoting efficiency and productivity.

The Bolens 18M also offers various attachment options, expanding its functionality beyond just mowing. Attachments such as snow blowers, tillers, and dump carts can be easily integrated, transforming the tractor into a multi-use gardening tool. This versatility is particularly appealing for homeowners looking to maintain their properties year-round.

Safety features are also a priority in the Bolens 18M design, with built-in mechanisms such as an automatic blade brake that stops the blades immediately when the operator leaves the seat, preventing any accidents.

In summary, the Bolens 18M stands out with its powerful engine, user-friendly hydrostatic transmission, adjustable cutting deck, ergonomic design, and versatility through attachments. With its solid build and thoughtful features, it continues to be a popular choice for those seeking reliable equipment for their lawn care and gardening tasks. Whether for residential use or commercial landscaping, the Bolens 18M delivers performance and innovation that users can depend on.