Manuals / Bolens / Lawn and Garden / Chipper

Bolens 450 Series Operation, Maintenance & Storage, Do not modify engine, Your Responsibility

Models: 450 Series 460 Series

1 36
Download 36 pages 386 b
Page 5
Image 5

Operation

1.Do not put hands and feet near rotating parts or in the feeding chambers and discharge opening. Contact with the rotating impeller can amputate fingers, hands, and feet.

2.Before starting the machine, make sure the chipper chute, feed intake, and cutting chamber are empty and free of all debris.

3.Thoroughly inspect all material to be shredded and remove any metal, rocks, bottles, cans, or other foreign objects which could cause personal injury or damage to the machine.

4.f it becomes necessary to push material through the shredder hopper, use a small diameter stick. Do not use your hands or feet.

5.f the impeller strikes a foreign object or if your machine should start making an unusual noise or vibration, immediately shut the engine off. Allow the impeller to come to a complete stop. Disconnect the spark plug wire, ground it against the engine and perform the following steps:

a.Inspect for damage.

b.Repair or replace any damaged parts.

c.Check for any loose parts and tighten to assure continued safe operation.

6.Do not allow an accumulation of processed material to build up in the discharge area. This can prevent proper discharge and result in kickback of material through the feed opening.

7.Do not attempt to shred or chip material larger than specified on the machine or in this manual. Personal injury or machine damage could result.

8.Never attempt to unclog either the feed intake or discharge opening while the engine is running. Shut the engine off, wait until all moving parts have stopped, disconnect the spark plug wire and ground it against the engine before clearing debris.

9.Never operate without the shredder hopper, chipper chute, or chute deflector properly attached to the machine. Never empty or change discharge bag while the engine is running.

10.Keep all guards, deflectors and safety devices in place and operating properly.

11.Keep your face and body back and to the side of the chipper chute while feeding material into the machine to avoid accidental kickback injuries.

12.Never operate this machine without good visibility or light.

13.Do not operate this machine on a paved, gravel or non-level surface.

14.Do not operate this machine while under the influence of alcohol or drugs.

15.Muffler and engine become hot and can cause a burn. Do not touch.

16.Never pick up or carry machine while the engine is running.

Maintenance & Storage

1.Never tamper with safety devices. Check their proper operation regularly.

2.Check bolts and screws for proper tightness at frequent intervals to keep the machine in safe working condition. Also, visually inspect machine for any damage and repair, if needed.

3.Before cleaning, repairing, or inspecting, stop the engine and make certain the impeller and all moving parts have stopped. Disconnect the spark plug wire and ground it against the engine to prevent unintended starting.

4.Do not change the engine governor settings or overspeed the engine. The governor controls the maximum safe operating speed of the engine.

5.Maintain or replace safety and instruction labels, as neces- sary.

6.Follow this manual for safe loading, unloading, transporting, and storage of this machine.

7.Never store the machine or fuel container inside where there is an open flame, spark or pilot light such as a water heater, furnace, clothes dryer, etc.

8.Always refer to the operator’s manual for proper instructions on off-season storage.

9.If the fuel tank has to be drained, do this outdoors.

10.Observe proper disposal laws and regulations for gas, oil, etc. to protect the environment.

Do not modify engine

To avoid serious injury or death, do not modify engine in any way. Tampering with the governor setting can lead to a runaway engine and cause it to operate at unsafe speeds. Never tamper with factory setting of engine governor.

Notice regarding Emissions

Engines which are certified to comply with California and federal EPA emission regulations for SORE (Small Off Road Equipment) are certified to operate on regular unleaded gasoline, and may include the following emission control systems: Engine Modifica- tion (EM) and Three Way Catalyst (TWC) if so equipped.

Your Responsibility

Restrict the use of this power machine to persons who read, un- derstand and follow the warnings and instructions in this manual and on the machine.

2

Safe

Operation

Practices

WARNING

This symbol points out important safety instructions, which if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this man- ual before attempting to operate this machine. Failure to comply with these instructions may result in personal injury. When you see this symbol.

HEED IT’S WARNING!

Your Responsibility Restrict the use

of this power machine to persons who read, understand

and follow the warnings and instructions

in this manual

and on the machine.

Page 4 Page 6
Page 5
Image 5
Bolens 450 Series, 460 Series warranty Operation, Maintenance & Storage, Do not modify engine, Your Responsibility
Page 4 Page 6

450 Series, 460 Series specifications

The Bolens 460 and 450 Series tractors represent a blend of robust engineering and user-friendly design, tailored to meet the needs of both commercial and residential users. Built with efficiency and versatility in mind, these tractors stand out in the competitive landscape of lawn and garden care equipment.

One of the defining features of the Bolens 460 Series is its powerful engine. Equipped with a reliable and performance-oriented engine, this series is designed to tackle tough mowing conditions and heavy-duty landscaping tasks with ease. The engine not only delivers significant horsepower but also emphasizes fuel efficiency, ensuring that users can work longer without frequent refueling.

In contrast, the Bolens 450 Series is slightly more compact, making it ideal for residential settings and smaller properties. It combines power with agility, featuring a maneuverable design that allows for easy navigation around tight spaces and obstacles. The 450 Series is well-suited for homeowners seeking to maintain their lawns and gardens without the bulk of larger equipment.

Both series are equipped with hydrostatic transmissions, providing seamless speed control and eliminating the need for manual gear shifting. This technology enhances user comfort and allows for a more enjoyable mowing experience, especially on uneven terrain. Additionally, the ergonomic seating and controls ensure that operators can work for extended periods without fatigue.

A standout characteristic of the Bolens 460 and 450 Series is their cutting systems. Both series feature innovative mowing decks designed to deliver a clean and precise cut every time. With adjustable cutting heights, users can easily customize their mowing experience to achieve the desired lawn finish. Furthermore, the optional mulch kit enhances the effectiveness of grass clippings, returning valuable nutrients to the soil.

Maintenance is made straightforward with these tractors, as both the 460 and 450 Series come with accessible components for easy servicing. This user-centric design philosophy ensures that owners can keep their equipment in top-notch condition without the hassle often associated with complex machinery.

In summary, the Bolens 460 and 450 Series tractors offer a perfect combination of power, efficiency, and user-friendly features. With their innovative technologies and thoughtful design characteristics, they serve as reliable companions for all lawn and garden care tasks, guaranteeing satisfaction for both commercial operators and homeowners alike. Whether you are looking to tackle large properties or maintain a smaller yard, these series provide diverse solutions for your outdoor needs.