SECTION 4: KNOW YOUR SNOW THROWER
WARNING: Read, understand, and follow all instructions and warnings on the machine and in this manual before operating.
Traction Control
The traction control is located on the right handle. Squeeze the traction control grip to engage the wheel drive. Release to stop.
Shift Lever
The shift lever is located in the center of the handle panel. The shift lever may be moved into one of six positions. Run engine with throttle in the fast positions Run engine with throttle in the fast position. Use the shift lever to determine ground speed. See Figure 14.
Forward
There are five forward speeds on this snow thrower. Position one (1) is the slowest and position five (5) is the fastest.
Reverse
Your snow thrower has two reverse (R) speeds. R1 is the slower, while R2 is the faster of the two.
NOTE: Model 614, 644, 664, and 6A4 has five forward positions and two reverse.
Auger Drive Control
The auger drive control is located on the left handle. Squeeze the control grip to engage the augers. Release to stop the snow throwing action.
Chute Directional Control
The chute directional control is located on left side of the snow thrower. See Figure 14.
To change the direction in which snow is thrown, turn chute directional control as follows:
•Crank clockwise to discharge to the left.
•Crank counterclockwise to discharge to the right.
Clean-Out Tool
WARNING: Never use your hand to clear a clogged discharged chute. Shut off engine and remain behind handles until all moving parts have stopped before unclogging.
The chute
See Figure 14.
| Traction | Shift |
|
|
|
| Drive Clutch | Auger |
|
| |
|
| Lever |
|
| |
|
|
| Drive Clutch |
| |
|
|
|
|
| |
|
|
|
|
| Tool |
| Gas Cap |
| Chute Directional |
| |
|
|
|
| ||
Discharge | Oil Fill |
| Control |
|
|
Chute |
|
|
|
| |
|
|
|
|
| |
|
|
| Choke |
| Primer |
|
|
|
|
| |
|
|
|
|
| Rope |
|
| Shift Lever |
|
| Start |
|
| Ignition |
| Handle | |
Auger |
|
| Throttle | ||
|
|
| |||
|
| Key |
| ||
|
| Model 664 Shown | Control |
| |
|
|
|
| ||
Figure 14
10
