Bolens 675B manual GW-1714 Bearing, Tapered Roller with Race GW-1325C

MODEL 675B

B

A

REF	PART NO.	DESCRIPTION	REF	PART NO.	DESCRIPTION
NO.			NO.
1	GW-1714	Bearing, Tapered Roller with Race	...	GW-1325C	Shim Set (Incl. two GW-1224-1; two 1224-
1a	GW-9400	Drive Shaft Bearing Cup			2 and one GW-1224-3 (A/R)
1b	GW-9401	Drive Shaft Bearing Cone	6	GW-9572	Hex Hd. Screw, 5⁄16-24 x 1-1⁄8*1
2	GW-20718	Spur Gear	7	GW-9944	Washer, Disc Spring (concave surface faces
3	GW-9301	Key, 3⁄16 sq. x 1			pulley)
			8	1108841	Key, 3⁄16 sq. x 1-1⁄2
4	1916597	Rolled Drive Shaft (Drive shaft is one-piece
			9	1916522	Transmission Drive Pulley
		with integral, single-lead, work-hardened
		front worm, and integral, six-lead work-	10	GW-1440	Support Washer
		hardened rear worm. Also includes	11	721-04044	Oil Seal, Input Pinion Shaft
		pressed-on GW-1714 and GW-9301)	12	1113527	Retaining Ring (external)
5	GW-1224-1	Shim, Rear Bearing Cap,.010" thick, see
			13	GW-9953	Thrust Washer
		Note below (A/R)
			14	GW-9428	Bushing
5	GW-1224-2	Shim, same as above, but.030" thick, see
			15	GW-9677	Set Screw, 5⁄16-18 x 3⁄8*
		Note (A/R)
			16	GW-20791	Input Pinion (steel shaft)
5	GW-1224-3	Shim, same as above, but.005" thick, see
			17	GW-20792	Input Pinion Gear
		Note (A/R)
5	GW-1224-4	Shim, same as above, but.062” thick, see	18	GW-9093	Retaining Ring (external)
		Note (A/R)	19	GW-20799	Pinion Assy. (Incl. Refs. 16, 17 & 18)
			20	GW-9517	Retaining Ring

NOTE: Shim between drive shaft rear bearing and rear bearing cap to achieve 5-to-15 thousandths of an inch (.005-.015) end play on drive shaft. A/R – As Required

* Specify GRADE 5 if ordering part locally.

29