Controls and Features | 4 |
| |
|
|
Blade Control
Recoil Starter 
Cutting Height Adjustment Lever (one at each wheel)
Figure
Blade Control
The blade control is attached to the upper handle of the mower. Depress and squeeze it against the upper handle to operate the unit. Release it to stop engine and blade.
WARNING: This blade control is a safety device. Never attempt to bypass its operations.
Cutting Height Adjustment Lever
One adjustment lever is located on each wheel and is used to adjust the cutting height. All four levers have to be at the same relative position to ensure a uniform cut. To adjust the cutting height, refer to the “Assembly &
Recoil Starter
The recoil starter is attached to the right upper handle. Stand behind the unit and pull the recoil starter rope to start the unit.
Mulching Baffle (If Equipped)
The mulching baffle is used to recirculate grass clippings back to the lawn. Attach it as instructed in the Assembly &
12