Using the remote control
BWhile holding the board in one hand or resting it on a flat surface, remove the front cover of the control board by removing its 4 screws.
Remote control transceiver PCB installation
B Remove the protective cover (Fig. 5, pos. 2) from one face of the support and attach it to the main PCB as shown in Fig. 6.
Fig. 6 Support correct position
B Using the supplied cable connect between the main PCB and the remote control PCB as shown in Fig. 7.
Fig. 5
B Remove the other protective cover and attach the remote control PCB as shown in Fig. 7.
Fig. 7
6 | 6 720 606 990 |