Using the remote control
temperature indication is shown on the remote control LCD.
B Switch ON/OFF switch to “OFF” position (0) and then back on (I).
B Press buttons or in order to reach requested temperature.
New remote control is programmed.
4.4Hot water temperature adjustment by remote control
B Press the buttons or on the remote control (Fig. 8, pos. 2) until the required temperature appears on the remote control display (Fig. 8, pos. 1).
B When the required temperature is displayed, turn on the hot water tap.
B The required temperature will flash on the remote control display.
B The flashing will stop when the required temperature is reached (tolerance from selected set point +/
4.5"Program" button on the remote control
Memorizing the water temperature with the remote control "Program" button
B Press the buttons or on the remote control (Fig. 9, pos. 2), ) until the required temperature appears on the remote control display (Fig. 9, pos. 1).
B You will now be able to memorize this temperature by pressing the "Program" button on the remote control (Fig. 9, pos. 3) for 3 seconds.
i | Note: Previously saved | |
temperature may show | ||
| ||
| on the display when first | |
| pushing the program | |
| button. Once "PR" | |
| shows on the display, | |
| the desired setting will | |
| be saved. | |
|
|
Fig. 8 Temperature adjustment
6 720 606 990 | 9 |