Bosch Appliances 650, 630 Web Client Software, Getting started, 7.1.1, System requirements, 7.1.2

76 en Web Client SoftwareVideo Recorder 630/650 Series

7	Web Client Software
	The Web Client Software gives full remote control of the DVR 600 Series using a PC. Up to
	four remote users can access and control the unit. Remote live viewing, search, playback, and
	system configuration are provided. Remote control functions include pan, tilt, and zoom
	control of cameras, and video archiving. An on-line status overview of the connected unit is
	also provided.
	To access a unit, a user must log on using the same User ID and Password used for local
	access. The Web Client will follow the permissions of the user account, restricting the
	functions available to each remote user; for example, the ability to archive video. See
	Section 5 Operating instructions, page 29 for more details on User Levels.
7.1	Getting started
	To use the Web Client, the unit and the PC must be able to connect via a TCP/IP network
	connection. Follow the instructions in Section 6.5 Network, page 67 to ensure the unit can be
	reached on the Network.
7.1.1	System requirements
	Operating platform: A PC running Windows XP, Windows Vista, or Windows 7.
	For the web support, the recommended PC requirements are:
		– Processor: Intel Core Duo, 2.0 GHz or comparable
		– RAM memory: 2048 MB
		– Free hard disk space: 10 MB
		– Graphics card: NVIDIA GeForce 8600 or higher
		– Network interface: 10/100-BaseT
		– Web Browser: Internet Explorer 7 or later
7.1.2	Connecting to the DVR 600 Series the first time
	The video decoder and playback controller is automatically installed on the PC the first time
	the user connects the PC to the DVR:
	1.	Open Internet Explorer.
	2.	In the address bar, type the address of the unit.
		– This can be either the IP address or a DDNS address, if enabled on the unit.
	3.	Internet Explorer will prompt to install the OCX software that is used to show live and
		playback video.
	4.	Once installed, the screen will refresh and prompt for a User ID and Password.
		– Once installed on a PC, the Web Client will not need to install the OCX again unless
		a new version is released with a new unit firmware.

F.01U.169.663 v2.0 2012.02 Installation and Operation manual Bosch Security Systems