14en Analog Camera Firmware Updates via the CTFID
2.4.2 | Uploading an AutoDome 600 or MIC Series 550 Service Pack | |
| The firmware upgrade process requires updates to one or all of the following files: | |
|
|
|
| File Name | Function |
| SCBootApp.g4i | Updates the system controller boot firmware. |
| G5Main.g4i | Updates the system controller firmware. |
| MICMain.g4i |
|
|
|
|
| FPGA_SC.g4i | Updates the FPGA chip. |
| FPGA_VCA.g4i | Updates the FPGA chip. |
| VCA_boot.g4i | Updates PTZ camera Video Content Analysis firmware. Install this file during |
|
| the installation of the SCBoot.g4i file. |
|
|
|
| VCA_app.g4i | Updates PTZ camera Video Content Analysis firmware. Install this file during |
|
| the installation of the SCMain.g4i file. |
|
|
|
| language_Lang | Uploads an additional language file for the AutoDome |
|
| menus. |
|
|
|
| The next sections contain information and instructions you need before upgrading an | |
| AutoDome 600 or a MIC Series 550 with the CTFID application. |
2.4.3 | Order to Upload Files | |
| There is a specific order in which service pack files must be uploaded to the camera. Before | |
| starting a firmware upgrade, note the current firmware version of your camera listed in the | |
| CTFID Device Information window. | |
| Use the following file order to upload firmware to the AutoDome: | |
| 1. | SC Boot: You must first upload the SC Boot file if the service pack contains a version of |
|
| the file greater than the installed version. The boot files are stored in a separate Boot |
|
| directory. Always check for and install this file before before installing the System |
|
| Configuration (SC) Main file. |
|
| Note: The SC Boot upload process erases the resident SC Main components, which |
|
| completely disables the AutoDome. When you upload the SC Boot files the CTFID |
|
| displays a message notifying the installer that the SC Main files must be reinstalled. |
| 2. | G5 Main, MIC Main: Upload this file after uploading the SC Boot file. If the service pack |
|
| does not contain an SC Boot update, you should upload the G5 Main file first. |
| 3. | FPGA: This file is uploaded along with the G5 Main or MIC Main file. |
| 4. | Language: Certain service packs include an optional language upgrade file used to update |
|
| the camera’s |
F.01U.097.269 4.0 2012.02 | Firmware Update Manual | Bosch Security Systems, Inc. |