Analog Camera Firmware Updates via the CTFID en 17
A highlighted filename with a check mark in the box indicates that the service pack directory contains that file. The subcomponent list also displays the version of the file in the service pack and the version of the file currently installed in the camera (Device Version). The CTFID automatically selects a service pack file for uploading if its version is greater than the version of the file installed in the camera.
Note: Boot files are stored in a separate Boot directory. If you are not in the Boot directory, the Firmware Upload window does not highlight the boot files even though they are included in the service pack.
3.Click the Upload Firmware button to accept the checked files.
4.Click Yes to the Warning message to start the update process.
CAUTION! Updating the firmware erases all device settings. To save these settings, click on
! the Configuration download button to save the current device settings and then upload this file after the completion of the firmware update.
Figure 2.16 Firmware Update Warning
5.The AutoDome disconnects from the CTFID; then restarts into the BootLoader mode and reconnects to the CTFID.
Figure 2.17 BootLoader Mode
Bosch Security Systems, Inc. | Firmware Update Manual | F.01U.097.269 4.0 2012.02 |