AutoDome 700/800IP AutoDome Firmware Updates via a TCP/IP Network en 1
1 | IP AutoDome Firmware Updates via a TCP/IP Network |
| The AutoDome 700 and AutoDome 800 incorporate a network video server in the IP module. |
| The primary function of the server is to encode video and control data for transmission over a |
| TCP/IP network. The IP AutoDome also allows an operator to update the AutoDome firmware |
| via the TCP/IP network. |
| Refer to the AutoDome 700 or AutoDome 800 Installation and User Manuals for specific |
| instructions on configuring an IP AutoDome. |
| To update firmware on an AutoDome 100 or an AutoDome 600 see Section 2 Analog Camera |
| Firmware Updates via the CTFID, page 7. |
1.1 | Upgrading the AutoDome 700 or AutoDome 800 |
| The preferred method to update an IP AutoDome is through a direct connection between the |
AutoDome and a PC. This method entails connecting the Ethernet cable from the IP AutoDome directly to the Ethernet port of a PC.
If the
Bosch Security Systems, Inc. | Firmware Update Manual | F.01U.097.269 4.0 2012.02 |