Conettix C900V2 Installation Guide 6.0 UL Standard 1610 and ULC S304 Intrusion System Installations

6.2Protected Premises Control Panel with Digital Dialer Backup

1.Use the D6200 Software to set the poll rate on the C900V2. For UL approved installations, the maximum interval is 360 seconds to meet the requirement for polling supervision established by UL. In most cases, to get a polling supervision interval of 360 seconds, set the Poll Rate to 240 and Retry to 13.

Because of differences in packet transmission time latency within different networks, the poll rate times vary. Contact Technical Support at Bosch Security Systems, Inc. for assistance in establishing the latency time for the network on which you are installing the C900V2.

Refer to D6200 Software Operation and Installation Guide (P/N: 4998154991).

2.Set DIP Switch 7 to the ON position to enable 240-second supervision signals.

Refer to Table 5 on page 10 for the functions of DIP Switches 5 through 9.

3.Add a telnet password to the communications protocol of the C900V2 (refer to Section 4.5.3 Configuration Using Telnet, step 6, on page 16). Retain this password for future reference.

4.Program the control panel to send a daily test signal through the digital dialer.

This tests the connection from the control panel to the C900V2.

5.Connect Output 1 from the C900V2 to a 24-hour zone on the control panel.

This tests the digital dialer if the C900V2 CPU fails.

6.Connect Output 2 from the C900V2 to a 24-our zone on the control panel.

This tests the digital dialer if the network communications path supervision fails.

You must use the C900V2 with a UL Listed Burglary Alarm Control Unit or a UL Listed combination Fire/Burglary Alarm Control Unit with an integral or Listed digital alarm communicator transmitter (DACT) installed according to the manufacturer’s instructions.

7.Install a tamper switch (such as a D110 Tamper Switch, available from Bosch Security Systems, Inc.) on the control panel enclosure and connect it to a 24-hour zone on the control panel. If you use a separate enclosure for the C900V2, install another tamper switch (D110) on the enclosure and connect it to the same 24-hour zone.

8.Set DIP Switch 5 to ON to enable Auto Fallback.

9.Set DIP Switch 6 to OFF so three hang-ups cause fallback.

Any error forces the C900V2 to switch to Fallback Mode for 2 minutes the next time the alarm panel seizes the line (if DIP Switch 5 is ON or DIP Switch 6 is OFF, or both, and the seizure occurs within 2 minutes). Intercept errors are always reported to the receiver. If the receiver does not acknowledge the signal in the programmed time, the control panel digital dialer hangs up and retries the message.

10.Set DIP Switch 9 to ON to enable Anti- Substitution/Anti-Replay.

11.Set the shorting link on P3 to the H position.

Refer to Figure 12 on page 20 and Table 10 on page 21 for the proper connection sequence.

22

Bosch Security Systems, Inc. 8/08 F01U087780-01

Page 21 Page 23
Page 22
Image 22
Bosch Appliances C900V2 manual Protected Premises Control Panel with Digital Dialer Backup
Page 21 Page 23

C900V2 specifications

The Bosch Appliances C900V2 is a remarkable addition to Bosch’s lineup of premium kitchen equipment, designed to cater to modern culinary demands while ensuring user-friendly experience and efficiency. This versatile appliance is aimed at homeowners looking to streamline their cooking process, combining advanced technologies with stylish design.

One of the standout features of the C900V2 is its intuitive touchscreen interface, which allows for seamless navigation through settings and functions. Users can easily customize cooking programs, access recipes, and adjust temperature settings with just a few taps. The interface enhances the cooking experience, making it accessible for both novice and experienced cooks.

The C900V2 offers multiple cooking modes tailored for various culinary styles. From convection baking and broiling to steam cooking, each mode is engineered to deliver precise results. The convection feature ensures even heat distribution, minimizing baking time and ensuring consistent textures and flavors. Steam cooking preserves nutrients and flavors, making it ideal for health-conscious families.

Energy efficiency is another hallmark of the Bosch C900V2. With an Energy Star rating, this appliance is designed to consume less energy without compromising performance. This ensures that users not only save on utility bills but also contribute to a more sustainable environment.

Safety is a priority for Bosch, and the C900V2 includes several features to ensure peace of mind while cooking. The appliance is equipped with child lock settings and automatic shut-off functions, minimizing the risk of accidents. Furthermore, the high-quality materials used in its construction are resistant to heat and stains, ensuring longevity and easy maintenance.

The sleek and modern design of the C900V2 complements any kitchen aesthetic. Available in various finishes, the appliance blends seamlessly with other Bosch products, creating a cohesive look. Its compact size also makes it suitable for smaller kitchens, maximizing space while offering high functionality.

In summary, the Bosch Appliances C900V2 stands out for its intuitive interface, diverse cooking modes, energy-efficient design, safety features, and elegant aesthetics. It is an ideal choice for anyone looking to enhance their culinary experience with a reliable and contemporary appliance that embodies Bosch's commitment to quality and innovation.
Top Page Image Contents