D7024

Installation and Setup

3.3Installing Optional Equipment

There are two expansion options that connect directly to the panel, and are automatically detected and supervised when the panel is re-powered:

•D7034 Four Point Expander

•D7039 Multiplex Expansion Module

When the panel is first re-powered after installing one of these options, the panel will display one of the following windows:

4Z EXP DETECTED PRESS CLEAR KEY

NAC EXP DETECTED

PRESS CLEAR KEY

MUX DETECTED

PRESS CLEAR KEY

Press the [Clear] key to confirm the installation of the device and automatically set it up for supervision.

If the [Clear] key is not pressed during the power-up time-out period, the panel will resume operation using the last confirmed status of the affected expander, and display an installation error condition.

Expansion devices such as point expanders, NAC expanders and multiplex expanders will be disabled if they are removed from the panel configuration after installation. Once installed, it is not possible to disable supervision of these devices.

Refer to the installation instructions for these expanders for additional information.

When the D7039 Multiplex Expansion Module is first installed, in most cases the system will display an EEPROM fault. It is necessary to run the default procedure to synchronize the EEPROM on the expansion module with the EEPROM in the panel. Cycle power to the panel and re-install option bus devices after the default procedure.

Replacement of a D7039 Multiplex Expansion Module causes programming of expansion points and PINs to be lost. Reprogram all multiplex point and PINs if the D7039 is replaced.

When the D7039 is first installed, or anytime the panel is re-powered with a D7039 that has no points programmed into it, the system will automatically start the multiplex auto-programming process:

AUTO PROGRAM? :YES(1)/NO(0)

Pressing the [1] key will start auto-programming, and pressing [0] will allow the panel to continue normal startup. The menu will automatically close with "NO" selected if no key is pressed after several minutes. Refer to Section 7.9.4 for detailed instructions for auto-programming mode.

 

D7024 Operation and Installation Guide

 

 

 

© 2005 Bosch Security Systems

Page 21

41740F

Page 10 Page 12
Page 11
Image 11
Bosch Appliances D7024 manual Installing Optional Equipment
Page 10 Page 12

D7024 specifications

The Bosch D7024 is an innovative appliance that combines cutting-edge technology with practical features to enhance your kitchen experience. As a part of Bosch's renowned lineup of high-quality products, the D7024 exemplifies the brand's commitment to efficiency, reliability, and modern design.

One of the most notable features of the Bosch D7024 is its Smart Home integration. This appliance can be seamlessly connected to your Wi-Fi network, allowing users to control various settings remotely via a smartphone app. Monitoring your appliance and adjusting settings from anywhere ensures convenience and flexibility, particularly for busy households.

In addition to connectivity, the D7024 is equipped with Bosch's advanced precision cooking technology. This feature ensures that your food is cooked evenly and perfectly every time. The appliance serves to maintain consistent temperatures, allowing for better results whether you are baking, roasting, or simmering. Users will appreciate how this technology optimizes cooking times and improves overall outcomes in their culinary ventures.

The Bosch D7024 also includes a variety of smart sensors that automatically adjust cooking parameters based on the type of food being prepared. This intelligent feature simplifies the cooking process, taking the guesswork out of meal preparation. The integrated temperature probes offer accurate readings, ensuring that your dishes are cooked to perfection.

Energy efficiency is another hallmark of the Bosch D7024. With an EcoSilence motor, this appliance operates quietly while minimizing power consumption. Consumers can enjoy the peace of mind that comes with reducing their carbon footprint without compromising on performance.

Moreover, the D7024 boasts a sleek and modern aesthetic, making it an attractive addition to any kitchen décor. Its user-friendly interface, complete with intuitive touch controls, ensures that even novice cooks can navigate through cooking options effortlessly.

Overall, the Bosch D7024 stands as a testament to Bosch's dedication to quality and innovation in home appliances. With its combination of smart features, advanced cooking technologies, and energy efficiency, it is designed not only to meet but exceed the expectations of today's consumers. This appliance is set to be a game-changer for anyone looking to elevate their culinary experience while enjoying the conveniences of modern technology.
Top Page Image Contents