D7024

Installation and Setup

3.0Installation and Setup

In the shipping box, you should find:

One D7024 Control/Communicator in static- resistant bag

One Enclosure with transformer

One hardware pack

One enclosure lock, washer, and keys

Six End-of-Line (EOL) resistors

The hardware necessary for installing the control panel in the enclosure is located in the hardware pack.

3.1Installing the Enclosure

Using the enclosure as a template, mark the top mounting holes on the mounting surface (see Figure 3).

Pre-start the mounting screws (not supplied) for these two holes. Slide the enclosure onto these screws so that the screws move up into the thinner section of the holes. Tighten the screws.

Screw in the remaining two screws in either set of bottom mounting holes.

Knock out the desired wire entrances on the enclosure.

3.2Installing the Control/Communicator

Mounting Holes

control panel location

ground

 

retainer holes

wire

 

for standoffs

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

retainer holes

for support posts

transformer

Mounting Holes

Figure 3: Enclosure Installation

The D7024 control board is static sensitive. Make sure you touch ground before handling the control board. This will discharge any static electricity in your body. For example, run the ground wire to the enclosure before handling the control board. Continue touching the enclosure while installing the control board.

Insert the three support posts in the retainer holes on enclosure (see Figures 3 and 4).

Press the 1/8" nylon standoffs (P/N: 30503) into the retainer holes (see Figures 3 and 4).

Slide the top of the control into the retainer tabs (the slots under the top of the frame). Once in the retainer tabs, the control will rest on the posts.

Secure the bottom of the control by screwing the two bottom corners through the support posts and through to the control retainer holes (see Figure 4).

1/8” nylon standoff

retainer holes

corner of

circuit board

support post

retainer hole in enclosure

=

Support Post Assembly

Once the control board is installed, be sure to connect the supplied ground wire between the door and the enclosure using the supplied nuts. A second ground wire is provided for connecting AC power ground. Both grounds connect to the stud in the enclosure to the left of the circuit board.

Figure 4: Standoff and Support Post Installation

 

D7024 Operation and Installation Guide

 

 

 

41740F

Page 20

© 2005 Bosch Security Systems

Page 10
Image 10
Bosch Appliances D7024 manual Installation and Setup, Installing the Enclosure, Installing the Control/Communicator

D7024 specifications

The Bosch D7024 is an innovative appliance that combines cutting-edge technology with practical features to enhance your kitchen experience. As a part of Bosch's renowned lineup of high-quality products, the D7024 exemplifies the brand's commitment to efficiency, reliability, and modern design.

One of the most notable features of the Bosch D7024 is its Smart Home integration. This appliance can be seamlessly connected to your Wi-Fi network, allowing users to control various settings remotely via a smartphone app. Monitoring your appliance and adjusting settings from anywhere ensures convenience and flexibility, particularly for busy households.

In addition to connectivity, the D7024 is equipped with Bosch's advanced precision cooking technology. This feature ensures that your food is cooked evenly and perfectly every time. The appliance serves to maintain consistent temperatures, allowing for better results whether you are baking, roasting, or simmering. Users will appreciate how this technology optimizes cooking times and improves overall outcomes in their culinary ventures.

The Bosch D7024 also includes a variety of smart sensors that automatically adjust cooking parameters based on the type of food being prepared. This intelligent feature simplifies the cooking process, taking the guesswork out of meal preparation. The integrated temperature probes offer accurate readings, ensuring that your dishes are cooked to perfection.

Energy efficiency is another hallmark of the Bosch D7024. With an EcoSilence motor, this appliance operates quietly while minimizing power consumption. Consumers can enjoy the peace of mind that comes with reducing their carbon footprint without compromising on performance.

Moreover, the D7024 boasts a sleek and modern aesthetic, making it an attractive addition to any kitchen décor. Its user-friendly interface, complete with intuitive touch controls, ensures that even novice cooks can navigate through cooking options effortlessly.

Overall, the Bosch D7024 stands as a testament to Bosch's dedication to quality and innovation in home appliances. With its combination of smart features, advanced cooking technologies, and energy efficiency, it is designed not only to meet but exceed the expectations of today's consumers. This appliance is set to be a game-changer for anyone looking to elevate their culinary experience while enjoying the conveniences of modern technology.