Filters and maintenance
Removing and inserting the metal grease filters:
1.Press the catch on the grease filters inwards and fold the filters down.
Inserting the filter:
1.Remove the metal filters (see "Removing and inserting the metal grease filters").
2.Insert an activated carbon filter on the right and left of the fan motor and rotate the filters until they lock into position.
1. |
2.Clean the filters.
3.Insert the clean filters back into the hood.
Activated carbon filter:
For neutralizing odours in recirculating mode.
Caution:
As the filter becomes more and more saturated with grease, there is an increased risk of fire and the function of the extractor hood may be impaired.
Important:
Change the activated carbon filter promptly to prevent the risk of fire from the accumulation of heat when
2. 
3.Insert the grease filters (see removal and installation of the
Removing the filter:
The filters are removed in reverse sequence.
Replacing the activated carbon filters:
❑During normal operation (1 to 2 hours per day) the activated carbon filters should be replaced approximately 1 x year.
❑The activated carbon filters are available from specialist outlets (see Optional accessories).
❑Use only original filters.
The appliance is then guaranteed to function perfectly.
Disposal of old activated carbon filters:
❑Activated carbon filters do NOT contain any harmful substances. They can therefore be disposed of as household refuse.
17
