Installation
08. Insert the other 4 screws with washers.
Before the 4 screws are tightened down, align the extractor hood properly.
09. Connect up the air outlet pipe.
10.Connect the hood to the electricity supply.
11.Stainless steel model:
❑Remove the protective film from the two flue ducts.
Avoid damage to the sensitive surface.
12.Screw the upper flue duct to the sides of the fixing bracket with 2 short screws.
13.Position the lower flue duct on the extractor hood and screw the extractor hood to the flue duct from below with 2 long screws.
To prevent scratching the upper duct when pushing on the lower duct, cover the edge of the lower duct with the installation template or other protective material.
Then screw the flue duct to the sides of the fixing bracket with 2 short screws.
Before tightening the 2 screws, align the flue duct.
2. |
1.
14.
24