56 en Subsystem MaintenanceRAID Subsystem
6.7.2 | Replacing a Hard Drive | |
| When a hard drives fails, it needs to be replaced. To replace a hard drive, please follow these | |
| steps: | |
|
| |
| CAUTION! | |
| The hard drive is | |
| be slow, gentle, and careful when setting down a hard drive. Only handle the hard drive by the | |
| edges, and avoid touching any components or connectors. | |
|
|
|
| 1. | Identify the drive tray that contains the hard drive that needs to be replaced. |
| 2. | Open the |
|
| unlocked. (See Figure 6.20) To do this, turn the |
|
| until the groove on its face is in a horizontal orientation. |
Fig. 6.20 Drive Tray Key-lock Rotation
3.Open the front flap by pushing the button at the front of the drive tray. (See Figure 6.21) The drive tray front flap will automatically be lifted and the drive tray will be dislodged from the chassis.
Fig. 6.21 Front View of an Individual Drive Tray
4.Remove the drive tray with the hard drive, gently and carefully withdrawing the drive tray with hard drive from the chassis.
5.Remove the four (4) retention screws located on the sides of the drive tray (two on each side.) (See Figure 6.22)
F.01U.027.799 V2 2008.08 | Bosch Security System |