RAID Subsystem | Introduction en | 9 |
|
|
|
i
Two (2)
NOTICE!
On receiving and unpacking your subsystem, please check the package contents against the included Unpacking Checklist. If any modules are missing, please contact your subsystem ven- dor immediately.
2.2Management
The RAID subsystem can be managed using either the firmware or the Bosch RAIDWatch web- based GUI. The firmware can be accessed by using either the LCD panel (see Figure 2.2) located at the front of the subsystem or a terminal emulation program installed on an external computer and connected to the COM1 on the controller module’s rear panel (see Figure 2.2) with the provided serial cable.
Fig. 2.2 Controller Module Rear Panel
If
Bosch Security System | F.01U.027.799 V2 2008.08 |