![](/images/new-backgrounds/1307454/30745425x1.webp)
E2600 DSA
7 | Turn on the DC power |
|
|
| Notice! |
i | DC power is an option that is available for use with your E2600 |
trays. If you choose to have | |
| install the equipment that provides special DC power connectors to each |
| in your storage array. |
|
|
|
|
| Warning! |
! | Risk of bodily injury |
A qualified service person is required to make the DC power connection according to NEC | |
| and CEC guidelines. |
|
|
Warning!
Risk of electrical shock
!This unit has more than one power source. To remove all power from the unit, all DC MAINS must be disconnected by removing all power connectors (item 4 below) from the power sup- plies.
| + |
1 | 2 |
|
3
4
Figure 7.1: Power cable
1 | Supply (Negative), Brown Wire, – | 3 | Ground, Green/Yellow Wire |
| 48 VDC |
|
|
|
|
|
|
2 | Return (Positive), Blue Wire | 4 | DC Power Connector |
|
|
|
|
Warning!
Risk of bodily injury
!Each tray has more than one power cord. To remove all electrical current from the devices, make sure that all of the power cords are disconnected from the power source and that the
Bosch Sicherheitssysteme GmbH | Quick Install Guide | 07/2012 V1 |